2025 Hyundai Tucson Engine Parts

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts are listed for the 2025 Hyundai Tucson, from ELRING and FEL-PRO.

Part numbers include ELRING B06520 and FEL-PRO BS40740.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2025 Hyundai Tucson come from 2 brands — ELRING and FEL-PRO.

Listed part numbers: ELRING B06610 and FEL-PRO 26925PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: ELRING B06600.

This table covers the Engine covers. Read more

4 Engine Cover parts for the 2025 Hyundai Tucson come from VARIOUS MFR. 1 part fits every engine; the other 3 are engine-specific.

Part numbers include VARIOUS MFR HY1228235, VARIOUS MFR HY1228211 and VARIOUS MFR HY1228223, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING B06660.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

ANCHOR supplies both parts for the 2025 Hyundai Tucson.

Part numbers include ANCHOR 10307 and ANCHOR 10305.

This table covers the Motor Mount kits. Read more

ANCHOR supplies the 3 Motor Mount Kit parts for the 2025 Hyundai Tucson.

Part numbers include ANCHOR 301067, ANCHOR 301056 and ANCHOR 301057.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

35 Oil parts are listed for the 2025 Hyundai Tucson, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 28 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2025 Hyundai Tucson, from DORMAN and NISSENS.

This group includes DORMAN 918141 and NISSENS 91729.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts are listed for the 2025 Hyundai Tucson, from DORMAN and REIN. All of them fit every engine offered in the 2025 Tucson.

Part numbers include DORMAN 090033, DORMAN 090053 and REIN HWU0110.

This table covers the caps on the oil filler neck. Read more

MOTORAD supplies both parts for the 2025 Hyundai Tucson. All of them fit every engine offered in the 2025 Tucson.

This group includes MOTORAD MO151 and MOTORAD MO223.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

21 Oil Filter parts are listed for the 2025 Hyundai Tucson, from PRO-TEC, CHAMP / LUBER-FINER, FRAM and 9 other brands. PRO-TEC PXL10473 carries the "Popular" badge.

In the Economy grade, PRO-TEC, CHAMP / LUBER-FINER, FVP and 1 other brand supply 7 parts: the catalog's value-priced group. A representative part number is PRO-TEC PXL10473.

In the High Performance / Heavy Duty grade, MOBIL supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1C158A.

The Standard Replacement section lists 13 options from VARIOUS MFR, WIX, BECK/ARNLEY and 5 other brands — built to original-equipment specification. VARIOUS MFR PO99527EX is listed in this group.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts for the 2025 Hyundai Tucson come from MOTORAD.

This group includes MOTORAD MO387 and MOTORAD MO371.

This table covers the Oil Filter housings. Read more

This group shows a single part: ACKOJA A520952.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

ELRING supplies both parts for the 2025 Hyundai Tucson.

This group includes ELRING B06530 and ELRING B07000.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: MELLING 1102.

This table covers the Oil Pump Chain guides. Read more

This group shows a single part: MELLING BG7063.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING B07160.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: MELLING 1101.

This table covers the guides and dampers that keep the timing chain on its path. Read more

3 Timing Chain Guide / Damper parts for the 2025 Hyundai Tucson come from MELLING.

This group includes MELLING BG7062, MELLING BG7061 and MELLING BT7073.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2025 Hyundai Tucson — MELLING BT7072.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

One part is listed for the 2025 Hyundai Tucson — MELLING S1330.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: ANCHOR 10250.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

SUNSONG supplies both parts for the 2025 Hyundai Tucson.

Listed part numbers: SUNSONG 5804242 and SUNSONG 5804243.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING B06680.

This table covers the fasteners that mount the turbocharger. Read more

This group shows a single part: ELRING B06710.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

One part is listed for the 2025 Hyundai Tucson — SUNSONG 5804236.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 Hyundai Tucson — ELRING B06620.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: MELLING VL1060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

ELRING supplies both parts for the 2025 Hyundai Tucson.

Listed part numbers: ELRING 330310 and ELRING 342000.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

3 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2025 Hyundai Tucson, from HYUNDAI and STANDARD MOTOR PRODUCTS. 1 part fits every engine; the other 2 are engine-specific.

This group includes HYUNDAI 2435508000, HYUNDAI 243572M000 and STANDARD MOTOR PRODUCTS VVT749.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

HYUNDAI supplies both parts for the 2025 Hyundai Tucson.

This group includes HYUNDAI 243702M800 and HYUNDAI 243502M800.