2019 Hyundai Tucson Engine Parts

This table covers the Balance shafts. Read more

This group shows a single part: HYUNDAI 233002G401.

This table covers the camshafts that open the valves. Read more

4 Camshaft parts are listed for the 2019 Hyundai Tucson, from HYUNDAI and SKP.

Part numbers include HYUNDAI 241002E000, HYUNDAI 241002GTB0 and HYUNDAI 242002GGA0, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts for the 2019 Hyundai Tucson come from ELRING.

Part numbers include ELRING 293946 and ELRING 127610.

This table covers the connecting rods between each piston and the crankshaft. Read more

3 Connecting Rod parts are listed for the 2019 Hyundai Tucson, from TOPLINE and HYUNDAI.

Listed part numbers: HYUNDAI 235102GGA0, TOPLINE CRHY23L and TOPLINE CRHY24.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts are listed for the 2019 Hyundai Tucson, from KING ENGINE BEARINGS, ENGINETECH, TOPLINE and 1 other brand. ENGINETECH BB1041 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4634XP.

The Standard Replacement section lists 5 options from KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand — built to original-equipment specification. ENGINETECH BB1041 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include ENGINETECH BB1041, KING ENGINE BEARINGS CR4634XP and ITM ENGINE COMPONENTS 4B2024, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Conversion / Lower Gasket Set parts are listed for the 2019 Hyundai Tucson, from AJUSA, ENGINETECH, MAHLE / CLEVITE and 4 other brands. APEX ACS13028 carries the "Popular" badge.

This table covers the crankshafts that turn piston motion into rotation. Read more

TOPLINE supplies both parts for the 2019 Hyundai Tucson.

Listed part numbers: TOPLINE CSHY23R and TOPLINE CSHY11.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 2019 Hyundai Tucson come from 3 brands — TOPLINE, KING ENGINE BEARINGS and ENGINETECH.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5771XP is listed in this group.

Standard Replacement: 3 parts, from TOPLINE and KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5707SI.

3 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: KING ENGINE BEARINGS MB5771XP, KING ENGINE BEARINGS MB5707SI and TOPLINE TWHY11, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts for the 2019 Hyundai Tucson come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. The "Popular" part is WJB / INMOTION PARTS WS99166. 1 part fits every engine; the other 7 are engine-specific.

Part numbers include WJB / INMOTION PARTS WS99166, BCA NS99157 and BCA NS99166, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

42 Crankshaft Seal parts for the 2019 Hyundai Tucson come from 15 brands — ELRING, VICTOR REINZ, FEL-PRO and 12 other brands. The "Popular" part is BCA NS224200. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

12 Cylinder Head Bolt parts are listed for the 2019 Hyundai Tucson, from AJUSA, ENGINETECH, FEL-PRO and 5 other brands. AJUSA 81045900 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Cylinder Head Gasket parts are listed for the 2019 Hyundai Tucson, from ELRING, AJUSA, MAHLE / CLEVITE and 2 other brands. AJUSA 10252000 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts are listed for the 2019 Hyundai Tucson, from ENGINETECH, MAHLE / CLEVITE, AJUSA and 2 other brands. ENGINETECH HY20HSE carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2019 Hyundai Tucson come from KAT'S HEATERS.

This group includes KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

3 Engine Cover parts are listed for the 2019 Hyundai Tucson, from TECHPRO and VARIOUS MFR. All of them fit every engine offered in the 2019 Tucson.

Part numbers include TECHPRO HY1228189 and TECHPRO HY1228190, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2019 Hyundai Tucson, from AJUSA, TOPLINE and ELRING.

Listed part numbers: AJUSA 50523000, AJUSA 50528700 and ELRING B34570, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts for the 2019 Hyundai Tucson come from 6 brands — MELLING, TOPLINE, ENGINETECH and 3 other brands. The "Popular" part is MELLING V3256.

Listed part numbers: MELLING V3256, ENGINETECH EM4435 and HYUNDAI 222122E000, plus the other parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

One part is listed for the 2019 Hyundai Tucson — WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts are listed for the 2019 Hyundai Tucson, from HYUNDAI, ATP, DORMAN and 2 other brands. HYUNDAI 231242E003 carries the "Popular" badge. 2 parts fit every engine; the other 5 are engine-specific.

This group includes HYUNDAI 231242E003, ATP 102422 and ATP 102233 and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

3 Intake Manifold parts for the 2019 Hyundai Tucson come from 3 brands — ACKOJA, HYUNDAI and SKP.

Listed part numbers: ACKOJA A520157, HYUNDAI 283102GGA0 and SKP SKA520157.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

4 Intake Manifold Actuator parts are listed for the 2019 Hyundai Tucson, from STANDARD MOTOR PRODUCTS, ACKOJA and HYUNDAI.

Part numbers include ACKOJA A52770072, HYUNDAI 283232GGA1 and STANDARD MOTOR PRODUCTS IMA145, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts are listed for the 2019 Hyundai Tucson, from ELRING, AJUSA, MAHLE / CLEVITE and 1 other brand. AJUSA 13276100 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 853640.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Intake Valve parts for the 2019 Hyundai Tucson come from 6 brands — MELLING, ENGINETECH, TOPLINE and 3 other brands. The "Popular" part is MELLING V3255.

Listed part numbers: MELLING V3255, ENGINETECH V1794 and ENGINETECH IM4436, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2019 Hyundai Tucson come from 5 brands — ACKOJA, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. 2 parts fit every engine; the other 3 are engine-specific.

Part numbers include ACKOJA A520499, ANCHOR 10058 and DEA / MARMON RIDE CONTROL A71211, among others listed above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2019 Hyundai Tucson come from ANCHOR. Every part fits both the 2.0L L4 and the 2.4L L4.

Part numbers include ANCHOR 300466 and ANCHOR 300465.