1976 Jensen Interceptor Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

3 Band parts are listed for the 1976 Jensen Interceptor, from ATP, BORG-WARNER and PIONEER.

This group includes ATP TX47, BORG-WARNER 16355BW and PIONEER 767026.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Bushing parts for the 1976 Jensen Interceptor come from 2 brands — ATP and PIONEER.

Listed part numbers: ATP TB18 and PIONEER 755106.

This table covers the Bushing kits. Read more

This group shows a single part: ATP TBS2.

This table covers the seals at the Clutch Pack Piston Dam. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Clutch Pack Piston Dam / Seal parts are listed for the 1976 Jensen Interceptor, from ATP and PIONEER.

This group includes ATP TO18, ATP TO22 and PIONEER 758013 and the remaining parts above.

This table covers the related components grouped with this assembly. Read more

5 Components parts for the 1976 Jensen Interceptor come from SONNAX. The "Popular" part is SONNAX 2291201K.

This group includes SONNAX 2291201K, SONNAX 22960 and SONNAX 2277112K and the remaining parts above.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Extension Housing Bushing parts for the 1976 Jensen Interceptor come from 3 brands — ATP, DURA-BOND and PIONEER.

This group includes ATP TB15, DURA-BOND RP6189T and PIONEER 755014.

This table covers the gaskets that seal the Extension Housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Extension Housing Gasket parts are listed for the 1976 Jensen Interceptor, from ATP and PIONEER.

This group includes ATP TG15 and PIONEER 749052.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Extension Housing Seal parts are listed for the 1976 Jensen Interceptor, from WJB / INMOTION PARTS, NATIONAL, ATP and 2 other brands. NATIONAL 7300S carries the "Popular" badge.

This group includes NATIONAL 7300S, WJB / INMOTION PARTS WS7300S and ATP HO8 and the remaining parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

6 Filter parts for the 1976 Jensen Interceptor come from 2 brands — ATP and PIONEER. The "Popular" part is ATP TF42.

The Economy section lists 1 option from ATP — the catalog's value-priced group. ATP TF42 is listed in this group.

In the Standard Replacement grade, ATP and PIONEER supply 5 parts: built to original-equipment specification. A representative part number is ATP B42.

Listed part numbers: ATP TF42, ATP B42 and ATP JX150, plus the other parts above.

This table covers the pans that hold automatic-transmission fluid. Read more

One part is listed for the 1976 Jensen Interceptor — ATP 103019.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Fluid Pan Gasket parts for the 1976 Jensen Interceptor come from 5 brands — MAHLE / CLEVITE, FEL-PRO, ATP and 2 other brands. The "Popular" part is FEL-PRO TOS18583.

Listed part numbers: FEL-PRO TOS18583, MAHLE / CLEVITE W39003TC and ATP TG10, plus the other parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

4 Fluid Pump Bushing parts for the 1976 Jensen Interceptor come from 3 brands — DURA-BOND, ATP and PIONEER.

This group includes ATP TB11, DURA-BOND DOT21T and DURA-BOND DOT21TG and the remaining parts above.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pump Gasket parts are listed for the 1976 Jensen Interceptor, from ATP and PIONEER.

This group includes ATP TG11 and PIONEER 749083.

This table covers the Fluid Pump O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Fluid Pump O-Ring parts for the 1976 Jensen Interceptor come from 2 brands — ATP and PIONEER.

This group includes ATP TO7 and PIONEER 760017.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

3 Fluid Pump Repair Sleeve parts are listed for the 1976 Jensen Interceptor, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS88187, NATIONAL 99187 and WJB / INMOTION PARTS WS99187.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Fluid Pump Seal parts are listed for the 1976 Jensen Interceptor, from NATIONAL, ATP, BCA and 2 other brands. NATIONAL 331227H carries the "Popular" badge.

Listed part numbers: NATIONAL 331227H, ATP TO8 and BCA NS331227H, plus the other parts above.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Input Shaft Seal parts are listed for the 1976 Jensen Interceptor, from ATP and PIONEER.

Listed part numbers: ATP TR17 and PIONEER 761029.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts are listed for the 1976 Jensen Interceptor, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS8609, NATIONAL 8609 and WJB / INMOTION PARTS WS8609.

This table covers the rebuild kits for this assembly. Read more

7 Rebuild Kit parts are listed for the 1976 Jensen Interceptor, from PIONEER and ATP. PIONEER 753040 carries the "Popular" badge.

In the Deluxe Kit (Master Kit + Filter, Band & Common Bushings) grade, PIONEER supplies 1 part: grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 753040.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 3 options from ATP and PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. ATP TMS14 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, PIONEER and ATP supply 3 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is ATP TGS23.

Listed part numbers: PIONEER 753040, ATP TMS14 and ATP TM14, plus the other parts above.

This table covers the Shift Improvement kits. Read more

6 Shift Improvement Kit parts for the 1976 Jensen Interceptor come from 3 brands — TRANSGO, PIONEER and ATP. The "Popular" part is TRANSGO SKTFSC.

In the Daily Driver grade, TRANSGO and PIONEER supply 2 parts: grouped for everyday commuting duty. A representative part number is TRANSGO SKTFSC.

In the Heavy Duty grade, ATP supplies 1 part: rated for severe service. A representative part number is ATP TK2.

The High Performance section lists 3 options from TRANSGO — engineered beyond original-equipment specification. TRANSGO TF2 is listed in this group.

Listed part numbers: TRANSGO SKTFSC, PIONEER 765011 and ATP TK2, plus the other parts above.

This table covers the Shift Linkage bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1976 Jensen Interceptor — ATP TO41.