2012 Nissan Versa Engine Parts

This table covers the chains that drive the balance shafts. Read more

One part is listed for the 2012 Nissan Versa — PREFERRED COMPONENTS INC C763.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: PREFERRED COMPONENTS INC T66221.

This table covers the Balance Shaft sprockets. Read more

3 Balance Shaft Sprocket parts are listed for the 2012 Nissan Versa, from INA, MELLING and PREFERRED COMPONENTS INC.

This group includes INA ZSS945, MELLING S945 and PREFERRED COMPONENTS INC G56320C.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts for the 2012 Nissan Versa come from 2 brands — ELRING and SCHAEFFLER.

This group includes ELRING 073890 and SCHAEFFLER SS2377.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2012 Nissan Versa — TOPLINE CRD43.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Connecting Rod Bearing parts are listed for the 2012 Nissan Versa, from ENGINETECH, MAHLE / CLEVITE, KING ENGINE BEARINGS and 2 other brands. ENGINETECH BB1049 carries the "Popular" badge.

This group includes ENGINETECH BB1049, MAHLE / CLEVITE CB1919A4 and ENGINETECH BB1006 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Conversion / Lower Gasket Set parts are listed for the 2012 Nissan Versa, from FEL-PRO, AJUSA, APEX and 3 other brands. FEL-PRO CS26338 carries the "Popular" badge.

Part numbers include FEL-PRO CS26338, AJUSA 54247800 and AJUSA 54157700, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts for the 2012 Nissan Versa come from 5 brands — TOPLINE, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 2 other brands. The "Popular" part is ENGINETECH BC1003.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 2012 Nissan Versa come from 4 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 1 other brand.

This group includes BCA NS99157, NATIONAL 99157 and NATIONAL 99181 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts for the 2012 Nissan Versa come from 11 brands — FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 8 other brands. The "Popular" part is AJUSA 15045100. 8 parts fit every engine; the other 15 are engine-specific.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2012 Nissan Versa — ELRING 504670.

This table covers the bolts that clamp the cylinder head to the block. Read more

12 Cylinder Head Bolt parts are listed for the 2012 Nissan Versa, from APEX, FEL-PRO, MAHLE / CLEVITE and 5 other brands. APEX AHB556 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts are listed for the 2012 Nissan Versa, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX AHG573 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

15 Cylinder Head Gasket Set parts are listed for the 2012 Nissan Versa, from ENGINETECH, FEL-PRO, AJUSA and 6 other brands. APEX AHS5056 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2012 Nissan Versa come from KAT'S HEATERS.

This group includes KAT'S HEATERS 28400 and KAT'S HEATERS 11417.

This table covers the Engine covers. Read more

One part is listed for the 2012 Nissan Versa — TECHPRO NI1228143.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2012 Nissan Versa, from AJUSA, ELRING, ITM ENGINE COMPONENTS and 1 other brand.

This group includes AJUSA 50433400, AJUSA 50283200 and ELRING 994560 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Exhaust Valve parts for the 2012 Nissan Versa come from 4 brands — QUALCAST, ENGINETECH, SBI and 1 other brand. The "Popular" part is ENGINETECH EM4455.

This group includes ENGINETECH EM4455, ENGINETECH EM1019 and QUALCAST 1013234 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts are listed for the 2012 Nissan Versa, from ATP, DAYCO, SKP and 2 other brands. ULTRA-POWER 594374 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594374.

The Standard Replacement section lists 4 options from ULTRA-POWER, ATP, DAYCO and 1 other brand — built to original-equipment specification. ULTRA-POWER 594374 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes ULTRA-POWER 594374, SKP SK594374 and ATP 102405 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Manifold Gasket parts are listed for the 2012 Nissan Versa, from FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 5 other brands. FEL-PRO MS97359 carries the "Popular" badge.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Intake Valve parts for the 2012 Nissan Versa come from 4 brands — QUALCAST, ENGINETECH, SBI and 1 other brand. The "Popular" part is ENGINETECH IM4454.

Listed part numbers: ENGINETECH IM4454, ENGINETECH IM1020 and QUALCAST 1013233, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

13 Motor Mount parts for the 2012 Nissan Versa come from 6 brands — BECK/ARNLEY, SKP, ANCHOR and 3 other brands. The "Popular" part is SKP SKMA7368. 1 part fits every engine; the other 12 are engine-specific.

The Economy section: 2 options from SKP. SKP SKMA7368 is listed in this group.

Standard Replacement: 11 parts, from BECK/ARNLEY, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. A representative part number is ANCHOR 9828.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2012 Nissan Versa come from ANCHOR.

Listed part numbers: ANCHOR 300361 and ANCHOR 300358.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

50 Oil parts for the 2012 Nissan Versa come from 7 brands — LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. The "Popular" part is LIQUI MOLY 20228. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 36 parts.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2012 Nissan Versa. All of them fit every engine offered in the 2012 Versa.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Cooler Seal parts are listed for the 2012 Nissan Versa, from BECK/ARNLEY, FEL-PRO and MAHLE / CLEVITE. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include BECK/ARNLEY 0396688, FEL-PRO 72493 and MAHLE / CLEVITE B32450.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: DORMAN 917443.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 2012 Nissan Versa come from 6 brands — ELRING, DORMAN, AGS and 3 other brands. The "Popular" part is DORMAN 090038. 6 parts fit every engine; the other 3 are engine-specific.

This group includes DORMAN 090038, DORMAN 090049 and AGS ODP00011 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Drain Plug Gasket parts are listed for the 2012 Nissan Versa, from DORMAN, ELRING, FEL-PRO and 2 other brands. DORMAN 097134 carries the "Popular" badge. 5 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: DORMAN 097134, FEL-PRO 73347 and AJUSA 01140600, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2012 Nissan Versa come from 5 brands — MOTORAD, CALORSTAT, DORMAN and 2 other brands. The "Popular" part is MOTORAD MO107. Every part fits both the 1.6L L4 and the 1.8L L4.

Listed part numbers: MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts for the 2012 Nissan Versa come from 15 brands — VARIOUS MFR, BOSCH, WIX and 12 other brands. The "Popular" part is CHAMP / LUBER-FINER PH2876. 16 parts fit every engine; the other 4 are engine-specific.

The Economy section: 8 options from VARIOUS MFR, CHAMP / LUBER-FINER, BOSCH and 4 other brands. CHAMP / LUBER-FINER PH2876 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

Standard Replacement: 10 parts, from DENSO, BOSCH, WIX and 6 other brands. A representative part number is BOSCH 3300.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 365960.