2010 Chrysler Sebring Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

WELLS supplies both parts for the 2010 Chrysler Sebring.

Listed part numbers: WELLS 1P1711 and WELLS 1P1878.

This table covers the harness connectors at the A/C Compressor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Compressor Relay Connector parts for the 2010 Chrysler Sebring come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Refrigerant Pressure Switch Connector parts for the 2010 Chrysler Sebring come from 2 brands — FOUR SEASONS and GPD.

This group includes FOUR SEASONS 20954 and GPD 1711515.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 ABS Wheel Speed Sensor Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 1 other brand. STANDARD MOTOR PRODUCTS HP3945 carries the "Popular" badge.

Part numbers include STANDARD MOTOR PRODUCTS HP3945, WELLS 1P1344 and ACDELCO PT2160, among others listed above.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — STANDARD MOTOR PRODUCTS S2082.

This table covers the harness connectors at the Air Bag Clockspring. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Air Intake / Charge Temperature Sensor Connector parts for the 2010 Chrysler Sebring come from 4 brands — STANDARD MOTOR PRODUCTS, WELLS, UNITED MOTOR PRODUCTS and 1 other brand. The "Popular" part is WELLS 1P1694.

This group includes WELLS 1P1694, STANDARD MOTOR PRODUCTS HP4665 and STANDARD MOTOR PRODUCTS S2034 and the remaining parts above.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Alternator / Generator Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS HP4347, STANDARD MOTOR PRODUCTS S1895 and WELLS 1P1344, among others listed above.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ambient Air Temperature Sensor Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S1918 and WELLS 1P3631.

This table covers the harness connectors at the Auto Shut Down Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Auto Shut Down Relay Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Blower Motor Control Module / Resistor Connector parts for the 2010 Chrysler Sebring come from 6 brands — DORMAN, FOUR SEASONS, STANDARD MOTOR PRODUCTS and 3 other brands. The "Popular" part is DORMAN 645712.

Listed part numbers: DORMAN 645712, STANDARD MOTOR PRODUCTS S2117 and DORMAN 645725, plus the other parts above.

This table covers the body-harness connectors and pigtails. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1960.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts for the 2010 Chrysler Sebring come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S3095 and WELLS 1P1824.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Camshaft Position Sensor Connector parts are listed for the 2010 Chrysler Sebring, from HOLSTEIN, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand.

Part numbers include HOLSTEIN 2HAR0060, STANDARD MOTOR PRODUCTS S2316 and UNITED MOTOR PRODUCTS CON62, among others listed above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Crankshaft Position Sensor Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS, HOLSTEIN, ROSTRA and 2 other brands. STANDARD MOTOR PRODUCTS S2316 carries the "Popular" badge.

This group includes STANDARD MOTOR PRODUCTS S2316, HOLSTEIN 2HAR0060 and ROSTRA 610139 and the remaining parts above.

This table covers the harness connectors at the Door Lock Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — STANDARD MOTOR PRODUCTS S2894.

This table covers the harness connectors at the EGR Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 EGR Valve Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S1922, UNITED MOTOR PRODUCTS CON50 and WELLS 1P1645.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 Fuel Injector Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 4 other brands. STANDARD MOTOR PRODUCTS HP3945 carries the "Popular" badge.

Part numbers include STANDARD MOTOR PRODUCTS HP3945, WELLS 1P1344 and ACDELCO PT2160, among others listed above.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Pump / Circuit Opening Relay Connector parts for the 2010 Chrysler Sebring come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S1600, UNITED MOTOR PRODUCTS CON30 and WELLS 1P4004.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — STANDARD MOTOR PRODUCTS S2830.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

4 Headlamp Wiring Harness / Connector parts for the 2010 Chrysler Sebring come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS F90008, STANDARD MOTOR PRODUCTS F90009 and STANDARD MOTOR PRODUCTS LWH106, among others listed above.

This table covers the harness connectors at the High Mount Brake Light. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 High Mount Brake Light Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1918 and WELLS 1P3631.

This table covers the harness connectors at the HVAC Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 HVAC Relay Connector parts for the 2010 Chrysler Sebring come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ignition Coil Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S2882 and WELLS 1P2664.

This table covers the harness connectors at the Ignition Starter Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Ignition Starter Switch Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS, WELLS, BWD/NIEHOFF and 2 other brands. STANDARD MOTOR PRODUCTS S1768 carries the "Popular" badge.

Part numbers include STANDARD MOTOR PRODUCTS S1768, WELLS 1P1558 and BWD/NIEHOFF PT1267, among others listed above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Knock / Detonation Sensor Connector parts are listed for the 2010 Chrysler Sebring, from DORMAN and WALKER PRODUCTS.

Part numbers include DORMAN 85137 and WALKER PRODUCTS 2701034.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Manifold Pressure (MAP) Sensor Connector parts are listed for the 2010 Chrysler Sebring, from ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include ROSTRA 610107, STANDARD MOTOR PRODUCTS S2816 and WELLS 1P1795.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Oil Pressure Sender / Switch Connector parts for the 2010 Chrysler Sebring come from 5 brands — WELLS, UNITED MOTOR PRODUCTS, ROSTRA and 2 other brands. The "Popular" part is UNITED MOTOR PRODUCTS CON58.

This group includes UNITED MOTOR PRODUCTS CON58, WELLS 1P1711 and ROSTRA 610040 and the remaining parts above.

This table covers the harness connectors at the Oil Temperature Sender. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2053.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1932 and WELLS 1P4135.

This table covers the harness connectors at the Park Assist (PAS) Camera. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: METRA AXACCH4.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Parking / Turn Signal Lamp Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS, HOLSTEIN and UNITED MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS HP4347 carries the "Popular" badge.

Listed part numbers: STANDARD MOTOR PRODUCTS HP4347, STANDARD MOTOR PRODUCTS S1895 and HOLSTEIN 2HAR0035, plus the other parts above.

This table covers the harness connectors at the Power Window Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Power Window Switch Connector parts for the 2010 Chrysler Sebring come from STANDARD MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S2079 and STANDARD MOTOR PRODUCTS S2093.

This table covers the harness connectors at the Radiator Fan Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Radiator Fan Relay Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S869 and UNITED MOTOR PRODUCTS CON182.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Radio Connector parts for the 2010 Chrysler Sebring come from METRA.

Part numbers include METRA 716522 and METRA AXADBXHCH2.

This table covers the Repair harnesses. Read more

5 Repair Harness parts are listed for the 2010 Chrysler Sebring, from ROSTRA and ATP. ROSTRA 3500172 carries the "Popular" badge.

Part numbers include ROSTRA 3500172, ATP TE12 and ATP TE14, among others listed above.

This table covers the harness connectors at the Shift Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1911.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 Speed Sensor Connector parts for the 2010 Chrysler Sebring come from 4 brands — STANDARD MOTOR PRODUCTS, WELLS, WALKER PRODUCTS and 1 other brand. The "Popular" part is WALKER PRODUCTS 2701055.

Part numbers include WALKER PRODUCTS 2701055, WELLS 1P1311 and STANDARD MOTOR PRODUCTS HP4215, among others listed above.

This table covers the harness connectors at the Starter Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Starter Motor Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Tail Lamp Assembly. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — WELLS 1P1824.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Temperature Sender / Sensor Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2442 and WELLS 1P2227.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — STANDARD MOTOR PRODUCTS S2839.

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Throttle Position Sensor (TPS) Connector parts for the 2010 Chrysler Sebring come from 2 brands — DORMAN and WELLS.

This group includes DORMAN 645233 and WELLS 1P2225.

This table covers the harness connectors at the Trailer Adapter. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — MOPAR 56019823.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Trailer Connector parts for the 2010 Chrysler Sebring come from 4 brands — MOPAR, STANDARD MOTOR PRODUCTS, TEKONSHA and 1 other brand.

Listed part numbers: MOPAR 82209771AB, STANDARD MOTOR PRODUCTS TC556 and TEKONSHA 118444, plus the other parts above.

This table covers the harness connectors at the Transmission-Automatic Axle Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Transmission-Automatic Axle Relay Connector parts for the 2010 Chrysler Sebring come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the wiring-harness connectors at the Transmission-Automatic. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: WELLS 1P4037.

This table covers the harness connectors at the Vapor Canister. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Vapor Canister Connector parts for the 2010 Chrysler Sebring come from STANDARD MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS HP4325 and STANDARD MOTOR PRODUCTS S1024.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — WELLS 1P1711.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Vapor Leak Detection Pump Connector parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS, ROSTRA and WELLS.

Listed part numbers: ROSTRA 610161, STANDARD MOTOR PRODUCTS HP4325 and STANDARD MOTOR PRODUCTS S1024, plus the other parts above.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — STANDARD MOTOR PRODUCTS S2279.

This table covers the harness connectors at the Window Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Window Motor Connector parts for the 2010 Chrysler Sebring come from 4 brands — ROSTRA, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand.

Part numbers include ROSTRA 610090, STANDARD MOTOR PRODUCTS S1922 and UNITED MOTOR PRODUCTS CON50, among others listed above.

This table covers the harness connectors at the Wiper Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Wiper Motor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: UNITED MOTOR PRODUCTS CON30.