2010 Chrysler Sebring Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

13 Camshaft Position Sensor parts for the 2010 Chrysler Sebring come from 13 brands — DORMAN, FAMOUS BRAND, HOLSTEIN and 10 other brands. The "Popular" part is DELPHI SS11361.

The Economy section lists 7 options from DORMAN, FAMOUS BRAND, HOLSTEIN and 4 other brands — the catalog's value-priced group. DORMAN 907745 is listed in this group.

In the Standard Replacement grade, DELPHI, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 3 other brands supply 6 parts: built to original-equipment specification. A representative part number is DELPHI SS11361.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

12 Crankshaft Position Sensor parts for the 2010 Chrysler Sebring come from 12 brands — SKP, SPECTRA PREMIUM, DORMAN and 9 other brands. The "Popular" part is SKP SK917758.

The Economy section: 6 options from SKP, SPECTRA PREMIUM, DORMAN and 3 other brands. SKP SK917758 is listed in this group.

Standard Replacement: 6 parts, from DELPHI, ASTEMO / HITACHI, NTK and 3 other brands. A representative part number is DELPHI SS12165.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

19 Ignition Coil parts for the 2010 Chrysler Sebring come from 17 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, SKP and 14 other brands. The "Popular" part is SKP SKIC127.

The Economy section: 9 options from SKP, AUTOTECNICA, B&B and 6 other brands. SKP SKIC127 is listed in this group.

In the Premium grade, DELPHI, ASTEMO / HITACHI and STANDARD MOTOR PRODUCTS supply 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is DELPHI GN10310.

Standard Replacement: 7 parts, from WALKER PRODUCTS, DENSO, BECK/ARNLEY and 3 other brands. A representative part number is DENSO 6735302.

This table covers the lock cylinders in the ignition switch. Read more

3 Ignition Lock Cylinder parts for the 2010 Chrysler Sebring come from 3 brands — DORMAN, STANDARD MOTOR PRODUCTS and WELLS.

The Economy section: 1 option from DORMAN. DORMAN 924721 is listed in this group.

Standard Replacement: 2 parts, from STANDARD MOTOR PRODUCTS and WELLS. A representative part number is STANDARD MOTOR PRODUCTS US537L.

Part numbers include DORMAN 924721, STANDARD MOTOR PRODUCTS US537L and WELLS 4H1874.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

12 Spark Plug parts are listed for the 2010 Chrysler Sebring, from CHAMPION, NGK, AUTOLITE and 4 other brands. NGK 7781 carries the "Popular" badge.

In the Copper / Nickel grade, DENSO supplies 1 part: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is DENSO 5018.

In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, NGK, AUTOLITE, BOSCH and 1 other brand supply 4 parts: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 7781.

The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 4 options from AUTOLITE, CHAMPION, NGK and 1 other brand — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. AUTOLITE XP5405 is listed in this group.

In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, ACDELCO and CHAMPION supply 3 parts: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 18.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

6 Spark Plug / Ignition Coil Boot parts for the 2010 Chrysler Sebring come from 6 brands — BWD/NIEHOFF, FAMOUS BRAND, WALKER PRODUCTS and 3 other brands. The "Popular" part is BWD/NIEHOFF SPB187.

The Economy section: 3 options from BWD/NIEHOFF, FAMOUS BRAND and WALKER PRODUCTS. BWD/NIEHOFF SPB187 is listed in this group.

Standard Replacement: 3 parts, from STANDARD MOTOR PRODUCTS, DENSO and NGK. A representative part number is STANDARD MOTOR PRODUCTS SPP124E.

This group includes BWD/NIEHOFF SPB187, FAMOUS BRAND 2500326356 and WALKER PRODUCTS 900P2068 and the remaining parts above.

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Spark Plug Tube Seal parts for the 2010 Chrysler Sebring come from MAHLE / CLEVITE.

Part numbers include MAHLE / CLEVITE B45848 and MAHLE / CLEVITE GS33903.