2010 Chrysler Sebring Automatic Transmission Parts

This table covers the Bushing kits. Read more

This group shows a single part: DURA-BOND TK38.

This table covers the Case covers. Read more

4 Case Cover parts are listed for the 2010 Chrysler Sebring, from DORMAN and ATP.

Listed part numbers: ATP 103237, DORMAN 265820 and DORMAN 265898, plus the other parts above.

This table covers the Clutch drums. Read more

One part is listed for the 2010 Chrysler Sebring — PA CARGO 107559.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

2 Clutch Plate Pack parts for the 2010 Chrysler Sebring come from RAYBESTOS POWERTRAIN.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN RHT96215.

The Steel Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN 000621 is listed in this group.

This group includes RAYBESTOS POWERTRAIN RHT96215 and RAYBESTOS POWERTRAIN 000621.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

One part is listed for the 2010 Chrysler Sebring — ROSTRA 550019.

This table covers the seals at the Control Solenoid. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Control Solenoid Seal parts are listed for the 2010 Chrysler Sebring, from ATP and PIONEER.

Listed part numbers: ATP TG31 and PIONEER 749307.

This table covers the Dipstick / Fluid Filler tubes. Read more

This group shows a single part: DORMAN 917327.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

11 Filter parts for the 2010 Chrysler Sebring come from 7 brands — ATP, HASTINGS / BALDWIN, VAICO and 4 other brands. The "Popular" part is ATP B102.

The Economy section lists 2 options from PA CARGO and VARIOUS MFR — the catalog's value-priced group. PA CARGO 61710B is listed in this group.

In the Standard Replacement grade, ATP, HASTINGS / BALDWIN, VAICO and 2 other brands supply 9 parts: built to original-equipment specification. A representative part number is ATP B102.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

2 Flexplate parts are listed for the 2010 Chrysler Sebring, from ATP and PIONEER.

This group includes ATP Z494 and PIONEER FRA550.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

2 Fluid Cooler Line / Hose parts for the 2010 Chrysler Sebring come from 2 brands — DORMAN and MOPAR.

Part numbers include DORMAN 624614 and MOPAR 5058363AD.

This table covers the harness connectors at the Fluid Cooler Line / Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — DORMAN 800724.

This table covers the pans that hold automatic-transmission fluid. Read more

9 Fluid Pan parts are listed for the 2010 Chrysler Sebring, from SPECTRA PREMIUM, SKP, DORMAN and 2 other brands. SKP SK264801 carries the "Popular" badge.

Listed part numbers: SKP SK264801, SKP SK265833 and ATP 103161, plus the other parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Fluid Pan Gasket parts for the 2010 Chrysler Sebring come from 4 brands — FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand. The "Popular" part is FEL-PRO TOS18687.

Part numbers include FEL-PRO TOS18687, FEL-PRO TOS18757 and MAHLE / CLEVITE W32770, among others listed above.

This table covers the Fluid pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

3 Fluid Pressure Sensor parts are listed for the 2010 Chrysler Sebring, from HOLSTEIN, ROSTRA and STANDARD MOTOR PRODUCTS.

Listed part numbers: HOLSTEIN 2OPS0188, ROSTRA 501204VC and STANDARD MOTOR PRODUCTS PS750.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 01998TG.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2010 Chrysler Sebring — PIONEER 749533.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 2010 Chrysler Sebring, from SKF and WJB / INMOTION PARTS.

This group includes SKF 15002A, SKF 14939 and WJB / INMOTION PARTS WS15002A.

This table covers the governors and modulators that control transmission shift pressure. Read more

This group shows a single part: DORMAN 926442.

This table covers the Kickdown solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2010 Chrysler Sebring — MOPAR 5078709AB.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts are listed for the 2010 Chrysler Sebring, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS8609, NATIONAL 8609 and WJB / INMOTION PARTS WS8609.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Output Shaft Bearing parts are listed for the 2010 Chrysler Sebring, from SCHAEFFLER and SKF.

This group includes SCHAEFFLER LM300811, SCHAEFFLER 103250 and SCHAEFFLER KLM300849 and the remaining parts above.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

6 Output Shaft Repair Sleeve parts for the 2010 Chrysler Sebring come from 5 brands — SCHAEFFLER, NATIONAL, SKF and 2 other brands. The "Popular" part is NATIONAL 99157.

Part numbers include NATIONAL 99157, SKF 99153 and BCA NS99157, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Output Shaft Seal parts for the 2010 Chrysler Sebring come from 7 brands — ACDELCO, NATIONAL, BCA and 4 other brands. The "Popular" part is ACDELCO 3459.

This group includes ACDELCO 3459 and BCA NS3459 and the remaining parts above.

This table covers the Pinion bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Pinion Bearing parts are listed for the 2010 Chrysler Sebring, from WJB / INMOTION PARTS, BCA and NATIONAL.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTA36.

The Standard Replacement section: 2 options from BCA and NATIONAL. BCA NBA36 is listed in this group.

Listed part numbers: WJB / INMOTION PARTS WTA36, BCA NBA36 and NATIONAL A36.

This table covers the Piston kits. Read more

PA CARGO supplies the 6 Piston Kit parts for the 2010 Chrysler Sebring. PA CARGO 107764 carries the "Popular" badge.

Listed part numbers: PA CARGO 107764, PA CARGO 61837A and PA CARGO 92912, plus the other parts above.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Pressure Control (EPC) Solenoid parts for the 2010 Chrysler Sebring come from 2 brands — ROSTRA and WELLS.

This group includes ROSTRA 520733 and WELLS 2N1253.

This table covers the rebuild kits for this assembly. Read more

11 Rebuild Kit parts are listed for the 2010 Chrysler Sebring, from PA CARGO, ATP, TRANSTEC and 2 other brands. MOPAR 68272623AB carries the "Popular" badge.

In the Banner Kit (Overhaul Kit + Friction Clutch Plates) grade, PA CARGO supplies 2 parts: grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK9200DS.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 3 options from MOPAR, ATP and PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. MOPAR 68272623AB is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, PA CARGO, ATP and TRANSTEC supply 6 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO K92900D.

This table covers the pistons in a transmission servo. Read more

This group shows a single part: PA CARGO K10790099.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

One part is listed for the 2010 Chrysler Sebring — SHEE-MAR SM2366.

This table covers the Shift Improvement kits. Read more

This group shows a single part: TRANSGO SK62TE.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

10 Shift Solenoid parts are listed for the 2010 Chrysler Sebring, from PA CARGO, STANDARD MOTOR PRODUCTS, DORMAN and 2 other brands. STANDARD MOTOR PRODUCTS TCS398 carries the "Popular" badge.

The Single Solenoid section lists 1 option from STANDARD MOTOR PRODUCTS — grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. STANDARD MOTOR PRODUCTS TCS398 is listed in this group.

The Solenoid Pack / Kit section lists 5 options from STANDARD MOTOR PRODUCTS, DORMAN, MOPAR and 1 other brand — grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. STANDARD MOTOR PRODUCTS TCS236 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Solenoid Switch Valve plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

TRANSGO supplies the 4 Solenoid Switch Valve Plug parts for the 2010 Chrysler Sebring.

Listed part numbers: TRANSGO RFESV420NT, TRANSGO RFESV453NT and TRANSGO RFESV420WT, plus the other parts above.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2010 Chrysler Sebring — DURA-BOND GMT92.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

3 Torque Converter parts for the 2010 Chrysler Sebring come from TC REMANUFACTURING.

Part numbers include TC REMANUFACTURING 58590, TC REMANUFACTURING 520AA and TC REMANUFACTURING HD520AA.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts for the 2010 Chrysler Sebring come from 2 brands — MOPAR and ROSTRA.

This group includes MOPAR 5169313AA and ROSTRA 520734.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

2 Torque Converter Repair Sleeve parts are listed for the 2010 Chrysler Sebring, from SCHAEFFLER and WJB / INMOTION PARTS.

Listed part numbers: SCHAEFFLER SR3477 and WJB / INMOTION PARTS WS99149.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Torque Converter Shaft Seal parts are listed for the 2010 Chrysler Sebring, from NATIONAL, WJB / INMOTION PARTS, ACDELCO and 3 other brands. NATIONAL 710628 carries the "Popular" badge.

This group includes NATIONAL 710628 and NATIONAL 331228H and the remaining parts above.

This table covers the Transfer Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Transfer Shaft Bearing parts are listed for the 2010 Chrysler Sebring, from WJB / INMOTION PARTS, SKF, ACDELCO and 3 other brands. WJB / INMOTION PARTS WTA35 carries the "Popular" badge.

Economy: 2 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTA35.

The Standard Replacement section: 6 options from SKF, ACDELCO, BCA and 2 other brands. ACDELCO A35 is listed in this group.

This group includes WJB / INMOTION PARTS WTA35, WJB / INMOTION PARTS WTLM501310 and ACDELCO A35 and the remaining parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

18 Transmission Fluid parts for the 2010 Chrysler Sebring come from 7 brands — PENTOSIN, LUCAS OIL, VALVOLINE and 4 other brands. The "Popular" part is VALVOLINE 822348.

The ATF +4 section lists 5 options from VALVOLINE and PENTOSIN — grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. VALVOLINE 822348 is listed in this group.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Multi-Vehicle section lists 6 options from LIQUI MOLY, LUCAS OIL and MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The ZF Fluid section lists 4 options from PENTOSIN and ZF — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058106 is listed in this group.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts for the 2010 Chrysler Sebring come from 2 brands — LUBEGARD and ATP. The "Popular" part is LUBEGARD 19610.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and ATP AT203, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Transmission Mount parts are listed for the 2010 Chrysler Sebring, from DEA / MARMON RIDE CONTROL, SKP, ANCHOR and 2 other brands. ANCHOR 3168 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM3168.

The Standard Replacement section: 5 options from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. ANCHOR 3168 is listed in this group.

This group includes ANCHOR 3168, SKP SKM3168 and DEA / MARMON RIDE CONTROL A5543 and the remaining parts above.

This table covers the Transmission Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Transmission Mount Bushing parts are listed for the 2010 Chrysler Sebring, from DEA / MARMON RIDE CONTROL and WESTAR.

Part numbers include DEA / MARMON RIDE CONTROL A5445 and WESTAR EM4127.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

2 Valve Body parts for the 2010 Chrysler Sebring come from SONNAX.

Part numbers include SONNAX CHR410 and SONNAX CHR412.