2010 Chrysler Sebring Electrical Parts

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator. Read more

7 Alternator / Generator parts are listed for the 2010 Chrysler Sebring, from WAI GLOBAL, DENSO, ACDELCO and 4 other brands. WAI GLOBAL 11286N carries the "Popular" badge.

In the New grade, WAI GLOBAL supplies 1 part: brand-new units rather than rebuilt ones. A representative part number is WAI GLOBAL 11286N.

In the Remanufactured grade, DENSO, ACDELCO, FVP and 3 other brands supply 6 parts: factory-rebuilt units with new wear components. A representative part number is DENSO 2101121.

Part numbers include WAI GLOBAL 11286N, DENSO 2101121 and ACDELCO 3342872, among others listed above.

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery. Read more

2 Battery parts for the 2010 Chrysler Sebring come from 2 brands — BOSCH and FULLRIVER.

In the AGM (Extended Life) grade, BOSCH supplies 1 part: grouped under the catalog's "AGM (Extended Life)" designation — the notes column spells out what sets them apart. A representative part number is BOSCH S675DT.

In the Performance AGM (Extended Life + Increased Power) grade, FULLRIVER supplies 1 part: grouped under the catalog's "Performance AGM (Extended Life + Increased Power)" designation — the notes column spells out what sets them apart. A representative part number is FULLRIVER FT82534.

This group includes BOSCH S675DT and FULLRIVER FT82534.

This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

3 Battery Cable parts are listed for the 2010 Chrysler Sebring, from STANDARD MOTOR PRODUCTS and MOPAR.

Part numbers include MOPAR 4795599AG, STANDARD MOTOR PRODUCTS A304T and STANDARD MOTOR PRODUCTS QC19.

This table covers the clamps and brackets that secure the battery. Read more

5 Battery Hold Down parts are listed for the 2010 Chrysler Sebring, from DORMAN and SKP. DORMAN 00083 carries the "Popular" badge.

Listed part numbers: DORMAN 00083, DORMAN 00082 and DORMAN 00081, plus the other parts above.

This table covers the trays the battery sits in. Read more

This group shows a single part: DORMAN 00071.

This table covers the engine-control modules that run fuel, spark and emissions. Read more

One part is listed for the 2010 Chrysler Sebring — DORMAN 318054.

This table covers the replacement fuses for this vehicle's fuse boxes. Typical signs include one circuit dead while its neighbor still works, or a fuse that blows again as soon as you replace it. Match amperage and fuse type. A repeat blow means a short — find it before the next fuse. Read more

21 Fuse parts for the 2010 Chrysler Sebring come from 2 brands — BUSSMANN and LITTELFUSE. The "Popular" part is BUSSMANN ATM10.

In the 10 Amp grade, BUSSMANN and LITTELFUSE supply 3 parts: grouped under the catalog's "10 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM10.

The 15 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "15 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM15 is listed in this group.

The 20 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "20 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM20 is listed in this group.

In the 25 Amp grade, BUSSMANN and LITTELFUSE supply 3 parts: grouped under the catalog's "25 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM25.

In the 30 Amp grade, BUSSMANN and LITTELFUSE supply 6 parts: grouped under the catalog's "30 Amp" designation — the notes column spells out what sets them apart. A representative part number is LITTELFUSE JCAS30.

The 40 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "40 Amp" designation — the notes column spells out what sets them apart. BUSSMANN FMX40 is listed in this group.

This table covers the horns mounted in the front of the vehicle. Read more

11 Horn parts for the 2010 Chrysler Sebring come from FIAMM. The "Popular" part is FIAMM 72112.

The Accessory Replacement section lists 5 options from FIAMM — grouped under the catalog's "Accessory Replacement" designation — the notes column spells out what sets them apart. FIAMM 72112 is listed in this group.

In the Standard Replacement grade, FIAMM supplies 6 parts: built to original-equipment specification. A representative part number is FIAMM 7421122.

This table covers the key fobs that lock, unlock and start the vehicle. Read more

DORMAN supplies the 3 Keyless Entry Remote parts for the 2010 Chrysler Sebring.

Part numbers include DORMAN 99173, DORMAN 99173ST and DORMAN 99269ST.

This table covers the Mobile Phone Hands Free control modules. Read more

This group shows a single part: MOPAR 82212499.

This table covers the totally-integrated power modules that distribute body electrical power. Typical signs include a cluster of unrelated faults, a no-communication code, or a module that will not sleep. Confirm power, ground and programming compatibility in the notes. Modules are rarely plug-and-play across years. Read more

This group shows a single part: DORMAN 599932.

This table covers the speed sensors on the transmission, transfer case or ABS ring. Typical signs include a dead speedometer, harsh transmission shifts, or a code for vehicle speed. Inspect the tone wheel and the connector before replacing the sensor. Read more

26 Speed Sensor parts for the 2010 Chrysler Sebring come from 12 brands — STANDARD MOTOR PRODUCTS, SKP, ATP and 9 other brands. The "Popular" part is SKP SK917602. Economy, Full Service Kit and Standard Replacement are all represented, and Standard Replacement alone accounts for 16 parts.

This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

15 Starter Motor parts are listed for the 2010 Chrysler Sebring, from PURE ENERGY, BOSCH, FVP and 6 other brands. PURE ENERGY 19026N carries the "Popular" badge.

New: 7 parts, from PURE ENERGY, TYC, BOSCH and 4 other brands. A representative part number is PURE ENERGY 19026N.

Remanufactured: 8 parts, from PURE ENERGY, ACDELCO, BOSCH and 5 other brands. A representative part number is PURE ENERGY 19026.