2017 Honda CR-V Engine Parts

This table covers the chains that drive the balance shafts. Read more

S.A. GEAR supplies both parts for the 2017 Honda CR-V.

Part numbers include S.A. GEAR C1149 and S.A. GEAR 76385P.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Balance Shaft Chain Tensioner parts for the 2017 Honda CR-V come from 2 brands — CLOYES and S.A. GEAR.

This group includes CLOYES 95989 and S.A. GEAR 91291.

This table covers the Balance Shaft sprockets. Read more

2 Balance Shaft Sprocket parts are listed for the 2017 Honda CR-V, from CLOYES and S.A. GEAR.

Part numbers include CLOYES S1116 and S.A. GEAR S1431.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts are listed for the 2017 Honda CR-V, from KING ENGINE BEARINGS, ENGINETECH and TOPLINE. KING ENGINE BEARINGS CR4542XPC carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 6 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4542XPC.

The Standard Replacement section lists 3 options from KING ENGINE BEARINGS, ENGINETECH and TOPLINE — built to original-equipment specification. KING ENGINE BEARINGS CR4542SM is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts are listed for the 2017 Honda CR-V, from MAHLE / CLEVITE, APEX, AJUSA and 4 other brands. APEX ACS1050 carries the "Popular" badge.

This group includes APEX ACS1050, AJUSA 54280700 and ELRING 701500 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Crankshaft Main Bearing parts for the 2017 Honda CR-V come from 3 brands — KING ENGINE BEARINGS, TOPLINE and ENGINETECH. The "Popular" part is KING ENGINE BEARINGS MB5259XPC.

The High Performance section: 4 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5259XPC is listed in this group.

Standard Replacement: 4 parts, from TOPLINE, KING ENGINE BEARINGS and ENGINETECH. A representative part number is KING ENGINE BEARINGS MB5259AM.

3 further parts sit outside the graded sections, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts for the 2017 Honda CR-V come from 4 brands — BCA, NATIONAL, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is BCA NS99315. 1 part fits every engine; the other 6 are engine-specific.

Part numbers include BCA NS99315, NATIONAL 99157 and BCA NS99157, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts for the 2017 Honda CR-V come from 12 brands — FEL-PRO, ELRING, NATIONAL and 9 other brands. The "Popular" part is FEL-PRO TCS46051. 6 parts fit every engine; the other 16 are engine-specific.

This table covers the bolts that clamp the cylinder head to the block. Read more

10 Cylinder Head Bolt parts are listed for the 2017 Honda CR-V, from AJUSA, FEL-PRO, TOPLINE and 4 other brands. ENGINETECH HB261 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Cylinder Head Gasket parts are listed for the 2017 Honda CR-V, from ELRING, APEX, FEL-PRO and 2 other brands. APEX AHG177 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Cylinder Head Gasket Set parts are listed for the 2017 Honda CR-V, from TOPLINE, MAHLE / CLEVITE, APEX and 5 other brands. APEX AHS1074 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2017 Honda CR-V come from KAT'S HEATERS. Every part fits both the 1.5L L4 Turbocharged and the 2.4L L4.

Part numbers include KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

6 Engine Cover parts are listed for the 2017 Honda CR-V, from TECHPRO and VARIOUS MFR. TECHPRO HO1228150 carries the "Popular" badge. All of them fit every engine offered in the 2017 CR-V.

Part numbers include TECHPRO HO1228150, TECHPRO HO1228157 and TECHPRO HO1228156, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2017 Honda CR-V, from AJUSA and TOPLINE.

This group includes AJUSA 50477900, AJUSA 50582000 and TOPLINE CGSH54TA and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 2017 Honda CR-V come from 4 brands — ENGINETECH, TOPLINE, MELLING and 1 other brand.

Listed part numbers: ENGINETECH EM1021, ENGINETECH EM1017 and MELLING V5839, plus the other parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts are listed for the 2017 Honda CR-V, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2017 CR-V.

This group includes STANDARD MOTOR PRODUCTS GDF101 and WELLS 5T5001.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2017 Honda CR-V, from ATP, ACKOJA, DORMAN and 1 other brand.

Listed part numbers: ACKOJA A260411, ATP 102139 and ATP 102488, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts are listed for the 2017 Honda CR-V, from FEL-PRO, ELRING, MAHLE / CLEVITE and 2 other brands. FEL-PRO MS97595 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS97595, AJUSA 13293200 and APEX AMS1740, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts for the 2017 Honda CR-V come from 4 brands — ENGINETECH, TOPLINE, MELLING and 1 other brand.

Part numbers include ENGINETECH IM1022, ENGINETECH IM1018 and MELLING V5840, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

11 Motor Mount parts for the 2017 Honda CR-V come from 6 brands — DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 3 other brands. The "Popular" part is ANCHOR 10093.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM9966 is listed in this group.

Standard Replacement: 5 parts, from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. A representative part number is ANCHOR 10093.

5 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300256.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

37 Oil parts for the 2017 Honda CR-V come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 30 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2017 Honda CR-V come from 2 brands — AUTOTECNICA and DORMAN.

This group includes AUTOTECNICA HA1423352 and DORMAN 921072.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 2017 Honda CR-V come from 5 brands — DORMAN, ELRING, AGS and 2 other brands. The "Popular" part is DORMAN 090033. 6 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts are listed for the 2017 Honda CR-V, from DORMAN, FEL-PRO, AJUSA and 3 other brands. DORMAN 095144 carries the "Popular" badge. 5 parts fit every engine; the other 1 is engine-specific.

This group includes DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2017 Honda CR-V come from 4 brands — CALORSTAT, DORMAN, GATES and 1 other brand. Every part fits both the 1.5L L4 Turbocharged and the 2.4L L4.

Listed part numbers: CALORSTAT OC2335, DORMAN 80985 and GATES 31284, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2017 Honda CR-V come from 15 brands — BOSCH, VARIOUS MFR, WIX and 12 other brands. The "Popular" part is WIX 57356XP. 16 parts fit every engine; the other 2 are engine-specific.

The Economy section: 5 options from BOSCH, FVP, PRO-TEC and 2 other brands. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57356XP is listed in this group.

Standard Replacement: 11 parts, from BOSCH, DENSO, WIX and 8 other brands. A representative part number is BOSCH 3323.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2017 Honda CR-V — FEL-PRO ES72748.

This table covers the Oil Filter Support tubes. Read more

One part is listed for the 2017 Honda CR-V — AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts are listed for the 2017 Honda CR-V, from DORMAN and SPECTRA PREMIUM.

Part numbers include DORMAN 264869 and SPECTRA PREMIUM HOP42A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO 73196.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

4 Oil Pump parts for the 2017 Honda CR-V come from 3 brands — TOPLINE, ENGINETECH and MELLING.

This group includes ENGINETECH EP570, MELLING M570 and TOPLINE OPH54T and the remaining parts above.

This table covers the chains that drive the oil pump. Read more

2 Oil Pump Chain parts are listed for the 2017 Honda CR-V, from INA and CLOYES.

In the Kit grade, INA supplies 1 part: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is INA ZC0129.

The Standard Replacement section: 1 option from CLOYES. CLOYES C931 is listed in this group.

Part numbers include INA ZC0129 and CLOYES C931.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

3 Oil Pump Repair Sleeve parts are listed for the 2017 Honda CR-V, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pump Seal parts are listed for the 2017 Honda CR-V, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 711005 and WJB / INMOTION PARTS WS711005.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

4 Piston parts are listed for the 2017 Honda CR-V, from ENGINETECH and TOPLINE.

Part numbers include ENGINETECH P15084, ENGINETECH K15084P and TOPLINE PAH54BE, among others listed above.