2026 Honda CR-V Engine Parts

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

FEL-PRO supplies both parts for the 2026 Honda CR-V.

This group includes FEL-PRO 26840PT and FEL-PRO 26912PT.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: QUALCAST 1030539.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: QUALCAST 1030540.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts for the 2026 Honda CR-V come from ANCHOR.

Part numbers include ANCHOR 10399 and ANCHOR 10398.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

37 Oil parts for the 2026 Honda CR-V come from 5 brands — LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands. The "Popular" part is LIQUI MOLY 22044. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands.

This table covers the drain plugs in the oil pan. Read more

This group shows a single part: REIN HWU0110.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO159.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 2026 Honda CR-V come from 11 brands — FRAM, VARIOUS MFR, BOSCH and 8 other brands. The "Popular" part is WIX 57356XP. 15 parts fit every engine; the other 2 are engine-specific.

The Economy section lists 7 options from VARIOUS MFR, BOSCH, CHAMP / LUBER-FINER and 3 other brands — the catalog's value-priced group. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 3 options from WIX, FRAM and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57356XP is listed in this group.

In the Standard Replacement grade, BOSCH, WIX, BECK/ARNLEY and 4 other brands supply 7 parts: built to original-equipment specification. A representative part number is BOSCH 3323.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2026 Honda CR-V — MELLING 1081.

This table covers the guides and dampers that keep the timing chain on its path. Read more

One part is listed for the 2026 Honda CR-V — MELLING BG7045.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: MELLING BT7059.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

ANCHOR supplies both parts for the 2026 Honda CR-V.

Listed part numbers: ANCHOR 10268 and ANCHOR 10347.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

3 Turbocharger Oil Line parts for the 2026 Honda CR-V come from 2 brands — SUNSONG and DORMAN.

This group includes DORMAN 667728, SUNSONG 5802170 and SUNSONG 5804143.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO VS50965R.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: ACKOJA A260287.