The 2019 Honda CR-V has 257 engine parts with verified fitment on this page — 57 part types and 60 brands, covering both the 1.5L L4 Turbocharged and the 2.4L L4. Each part includes a manufacturer part number and application notes.
The engine on the 2019 Honda CR-V covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil (37 parts), Oil Filter (17 parts) and Timing Chain Guide / Damper (14 parts). The other 54 part types cover the remaining 189 parts.
The 2019 Honda CR-V was sold with both the 1.5L L4 Turbocharged and the 2.4L L4. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
60 brands supply engine parts for the 2019 Honda CR-V, led by MELLING (16 parts), TOPLINE (15 parts) and MAHLE / CLEVITE (13 parts), plus 57 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2019 Honda CR-V. 36 parts have it, including BCA NS99315 (Crankshaft Repair Sleeve) and APEX ATC1490 (Crankshaft Seal). Each part number opens a page with every vehicle that part fits.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 1.5L L4 Turbocharged | BB1502 | 🇺🇸 US | Set | View on Amazon |
| TOPLINE Fits: 1.5L L4 Turbocharged | RBH54T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
2 Connecting Rod Bearing parts are listed for the 2019 Honda CR-V, from ENGINETECH and TOPLINE.
Part numbers include ENGINETECH BB1502 and TOPLINE RBH54T.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 Turbocharged | 54280700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | CS55383 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 1.5L L4 Turbocharged | CBSH54 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Conversion / Lower Gasket Set parts are listed for the 2019 Honda CR-V, from AJUSA, MAHLE / CLEVITE and TOPLINE.
Part numbers include AJUSA 54280700, MAHLE / CLEVITE CS55383 and TOPLINE CBSH54.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 1.5L L4 Turbocharged | BC1007 | 🇺🇸 US | Set | View on Amazon |
| TOPLINE Fits: 1.5L L4 Turbocharged | MBH54T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| TOPLINE Fits: 1.5L L4 Turbocharged | TWH54T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thrust Bearing | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Crankshaft Main Bearing parts for the 2019 Honda CR-V come from 2 brands — TOPLINE and ENGINETECH.
Part numbers include ENGINETECH BC1007, TOPLINE MBH54T and TOPLINE TWH54T.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Popular Fits: 1.5L L4 Turbocharged | NS99315 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| NATIONAL Popular Fits: 1.5L L4 Turbocharged | 99157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| BCA Fits: 1.5L L4 Turbocharged | NS99157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| NATIONAL Fits: 1.5L L4 Turbocharged | 99315 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.5L L4 Turbocharged | WS99315 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.5L L4 Turbocharged | WS99157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
6 Crankshaft Repair Sleeve parts for the 2019 Honda CR-V come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. The "Popular" part is BCA NS99315.
This group includes BCA NS99315, NATIONAL 99157 and BCA NS99157 and the remaining parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 1.5L L4 Turbocharged | ATC1490 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| FEL-PRO Popular Fits: 1.5L L4 Turbocharged | TCS46051 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontMust be used with Oil pan Gasket | View on Amazon |
| NATIONAL Popular Fits: 1.5L L4 Turbocharged | 228008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| ACDELCO Fits: 1.5L L4 Turbocharged | 228008 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| BCA Fits: 1.5L L4 Turbocharged | NS228008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| FEL-PRO Fits: 1.5L L4 Turbocharged | BS40800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EX Model or EX-L Model or Touring | View on Amazon |
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | 68080 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fluoroelastomer | View on Amazon |
| NATIONAL Fits: 1.5L L4 Turbocharged | 711005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| SCHAEFFLER Fits: 1.5L L4 Turbocharged | SS3343 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear10 MM Width | View on Amazon |
| VICTOR REINZ Fits: 1.5L L4 Turbocharged | 191037201 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.5L L4 Turbocharged | WS228008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
11 Crankshaft Seal parts for the 2019 Honda CR-V come from 9 brands — FEL-PRO, NATIONAL, APEX and 6 other brands. The "Popular" part is APEX ATC1490.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 Turbocharged | 81072000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 1.5L L4 Turbocharged | ES73404 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| TOPLINE Fits: 1.5L L4 Turbocharged | HBH54T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
3 Cylinder Head Bolt parts are listed for the 2019 Honda CR-V, from AJUSA, FEL-PRO and TOPLINE.
This group includes AJUSA 81072000, FEL-PRO ES73404 and TOPLINE HBH54T.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 Turbocharged | 10236600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| APEX Fits: 1.5L L4 Turbocharged | AHG177 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 1.5L L4 Turbocharged | 26787PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | 55383 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Cylinder Head Gasket parts are listed for the 2019 Honda CR-V, from AJUSA, APEX, FEL-PRO and 1 other brand.
This group includes AJUSA 10236600, APEX AHG177 and FEL-PRO 26787PT and the remaining parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 Turbocharged | 52524500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | HS55383 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
| TOPLINE Fits: 1.5L L4 Turbocharged | HSH54TA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
| TOPLINE Fits: 1.5L L4 Turbocharged | HSH54T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Cylinder Head Gasket Set parts are listed for the 2019 Honda CR-V, from TOPLINE, AJUSA and MAHLE / CLEVITE.
Part numbers include AJUSA 52524500, MAHLE / CLEVITE HS55383 and TOPLINE HSH54TA, among others listed above.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 1.5L L4 Turbocharged | 28500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Heater Replacement Cord | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
This group shows a single part: KAT'S HEATERS 28500.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Popular Fits: 1.5L L4 Turbocharged | HO1228150 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerMaterial: PE/Vacuum Form | View on Amazon |
| TECHPRO Fits: 1.5L L4 Turbocharged | HO1228157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| TECHPRO Fits: 1.5L L4 Turbocharged | HO1228156 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerEX Model or EX-L Model or LX Model or Touring | View on Amazon |
| TECHPRO Fits: 1.5L L4 Turbocharged | HO1228180 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerRear Floor Under Cover | View on Amazon |
| VARIOUS MFR Fits: 1.5L L4 Turbocharged | HO1228150 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Performance | View on Amazon |
| VARIOUS MFR Fits: 1.5L L4 Turbocharged | HO1228180 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerRear Floor Under Cover | View on Amazon |
This table covers the Engine covers.
6 Engine Cover parts are listed for the 2019 Honda CR-V, from TECHPRO and VARIOUS MFR. TECHPRO HO1228150 carries the "Popular" badge.
Listed part numbers: TECHPRO HO1228150, TECHPRO HO1228157 and TECHPRO HO1228156, plus the other parts above.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 Turbocharged | 50477900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 1.5L L4 Turbocharged | CGSH54TA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Engine Kit Gasket Set parts are listed for the 2019 Honda CR-V, from AJUSA and TOPLINE.
This group includes AJUSA 50477900 and TOPLINE CGSH54TA.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 1.5L L4 Turbocharged | EM1021 | 🇺🇸 US | View on Amazon | |
| MELLING Fits: 1.5L L4 Turbocharged | V5839 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 1.5L L4 Turbocharged | 1030539 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.903 Head Diameter. 0.215 stem. 3.898 OAL. OEM # 0614759BU00 | View on Amazon |
| TOPLINE Fits: 1.5L L4 Turbocharged | EVH54T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
4 Exhaust Valve parts for the 2019 Honda CR-V come from 4 brands — ENGINETECH, MELLING, QUALCAST and 1 other brand.
Part numbers include ENGINETECH EM1021, MELLING V5839 and QUALCAST 1030539, among others listed above.
Fuel Pump Camshaft Follower
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 1.5L L4 Turbocharged | GDF101 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | O.E.M. Replacement: Yes | View on Amazon |
| WELLS Fits: 1.5L L4 Turbocharged | 5T5001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the followers that drive a mechanical fuel pump off the camshaft.
2 Fuel Pump Camshaft Follower parts are listed for the 2019 Honda CR-V, from STANDARD MOTOR PRODUCTS and WELLS.
Part numbers include STANDARD MOTOR PRODUCTS GDF101 and WELLS 5T5001.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 1.5L L4 Turbocharged | A260411 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits EX Model or EX-L Model or TouringPulley Onlyor EX Model or EX-L Model or Touring | View on Amazon |
| ATP Fits: 1.5L L4 Turbocharged | 102139 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EX Model or EX-L Model or LX Model or Touring | View on Amazon |
| PIONEER Fits: 1.5L L4 Turbocharged | DA2139 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EX Model or EX-L Model or LX Model or Touring | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
3 Harmonic Balancer parts are listed for the 2019 Honda CR-V, from ACKOJA, ATP and PIONEER.
This group includes ACKOJA A260411, ATP 102139 and PIONEER DA2139.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 Turbocharged | 13293200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 1.5L L4 Turbocharged | MS97619 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | MS20396 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Intake Manifold Gasket parts are listed for the 2019 Honda CR-V, from AJUSA, FEL-PRO and MAHLE / CLEVITE.
Listed part numbers: AJUSA 13293200, FEL-PRO MS97619 and MAHLE / CLEVITE MS20396.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 1.5L L4 Turbocharged | IM1022 | 🇺🇸 US | View on Amazon | |
| MELLING Fits: 1.5L L4 Turbocharged | V5840 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Except Japan Built Vehicle Part | View on Amazon |
| QUALCAST Fits: 1.5L L4 Turbocharged | 1030540 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.102 Head DIA. 0.216 Stem. 3.913 OAL. OEM # 1471159B000 | View on Amazon |
| TOPLINE Fits: 1.5L L4 Turbocharged | IVH54T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
4 Intake Valve parts for the 2019 Honda CR-V come from 4 brands — ENGINETECH, MELLING, QUALCAST and 1 other brand.
Listed part numbers: ENGINETECH IM1022, MELLING V5840 and QUALCAST 1030540, plus the other parts above.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEA / MARMON RIDE CONTROL Popular Fits: 1.5L L4 Turbocharged | A65114 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right, Includes Bracket | View on Amazon |
| ANCHOR Fits: 1.5L L4 Turbocharged | 10093 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightReuse OE Bracket | View on Amazon |
| BECK/ARNLEY Fits: 1.5L L4 Turbocharged | 1042461 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| PIONEER Fits: 1.5L L4 Turbocharged | 610093 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightEX Model or EX-L Model or LX Model or Touring | View on Amazon |
| WESTAR Fits: 1.5L L4 Turbocharged | EM7488 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
5 Motor Mount parts for the 2019 Honda CR-V come from 5 brands — DEA / MARMON RIDE CONTROL, ANCHOR, BECK/ARNLEY and 2 other brands. The "Popular" part is DEA / MARMON RIDE CONTROL A65114.
This group includes DEA / MARMON RIDE CONTROL A65114, ANCHOR 10093 and BECK/ARNLEY 1042461 and the remaining parts above.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 1.5L L4 Turbocharged | 300256 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Motor Mount kits.
This group shows a single part: ANCHOR 300256.
Oil
Summary: Notes list SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY, VALVOLINE and MOBIL.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 1.5L L4 Turbocharged | 22044 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-201 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 1.5L L4 Turbocharged | 20438 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 0W-205 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 1.5L L4 Turbocharged | 22046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-205 Liter | View on Amazon |
| MOBIL Popular Fits: 1.5L L4 Turbocharged | 124184 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20Mobil 1 Advanced Fuel Economy | View on Amazon |
| MOBIL Popular Fits: 1.5L L4 Turbocharged | 125197 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic 0W-20Mobil Full Synthetic | View on Amazon |
| VALVOLINE Popular Fits: 1.5L L4 Turbocharged | VV916 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| IDEMITSU Fits: 1.5L L4 Turbocharged | 30016051750 | 🇺🇸 US | IFG3 0W-20 SQ/GF-7A1 Quart | View on Amazon |
| IDEMITSU Fits: 1.5L L4 Turbocharged | 30016051953 | 🇺🇸 US | IFG3 0W-20 SQ/GF-7A5 Quart | View on Amazon |
| LIQUI MOLY Fits: 1.5L L4 Turbocharged | 2207 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special TEC AA 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 1.5L L4 Turbocharged | 20436 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 1.5L L4 Turbocharged | 20198 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec V 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 1.5L L4 Turbocharged | 20408 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec LR 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 1.5L L4 Turbocharged | 2208 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 1.5L L4 Turbocharged | 20200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec V 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 1.5L L4 Turbocharged | 22190 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6610 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 1.5L L4 Turbocharged | 20410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec LR 0W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 1.5L L4 Turbocharged | 22048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-2020 Liter | View on Amazon |
| LUCAS OIL Fits: 1.5L L4 Turbocharged | 10564 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC MOTOR OIL SAE 0W-201 qt | View on Amazon |
| LUCAS OIL Fits: 1.5L L4 Turbocharged | 18003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Motor Oil SAE 0W-206 Gallon | View on Amazon |
| MOBIL Fits: 1.5L L4 Turbocharged | 120926 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance 0W-20Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 1.5L L4 Turbocharged | 124592 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Truck & SUV 0W-20Mobil 1 Truck & SUV | View on Amazon |
| PENTOSIN Fits: 1.5L L4 Turbocharged | 8044210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: 1.5L L4 Turbocharged | 8044317 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| PENTOSIN Fits: 1.5L L4 Turbocharged | 8044319 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| PENTOSIN Fits: 1.5L L4 Turbocharged | 8044212 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0W-20-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| VALVOLINE Fits: 1.5L L4 Turbocharged | 891682 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 1.5L L4 Turbocharged | 904536 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 1.5L L4 Turbocharged | 904538 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 0W-205 Quart | View on Amazon |
| VALVOLINE Fits: 1.5L L4 Turbocharged | 881150 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 1.5L L4 Turbocharged | 898664 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hybrid Vehicle Full Synthetic SAE 0W-205 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 1.5L L4 Turbocharged | 125203 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage 0W-20Mobil Full Synthetic | View on Amazon |
| MOBIL Fits: 1.5L L4 Turbocharged | 122535 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Mileage 0W-20Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 1.5L L4 Turbocharged | 123836 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance High Mileage 0W-20Extended Performance High Mileage Synthetic Motor Oil 0W-20, 1 Quart | View on Amazon |
| VALVOLINE Fits: 1.5L L4 Turbocharged | 833002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 1.5L L4 Turbocharged | 852400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 1.5L L4 Turbocharged | 881149 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 1.5L L4 Turbocharged | 881168 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 0W-20Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
37 Oil parts for the 2019 Honda CR-V come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 30 parts.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 1.5L L4 Turbocharged | 090053 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | MetalPilot Point | View on Amazon |
| ACKOJA Fits: 1.5L L4 Turbocharged | A260253 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EX Model or EX-L Model or Touringwith OE No. 90009R70A00 | View on Amazon |
| DORMAN Fits: 1.5L L4 Turbocharged | 090033 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | StandardM14-1.50 | View on Amazon |
| REIN Fits: 1.5L L4 Turbocharged | HWU0110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKP Fits: 1.5L L4 Turbocharged | SK090053CD | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Metal | View on Amazon |
This table covers the drain plugs in the oil pan.
5 Oil Drain Plug parts for the 2019 Honda CR-V come from 4 brands — DORMAN, ACKOJA, REIN and 1 other brand. The "Popular" part is DORMAN 090053.
This group includes DORMAN 090053, ACKOJA A260253 and DORMAN 090033 and the remaining parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 1.5L L4 Turbocharged | 095144 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Aluminum | View on Amazon |
| AJUSA Fits: 1.5L L4 Turbocharged | 22007400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| APEX Fits: 1.5L L4 Turbocharged | ADP1909 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 1.5L L4 Turbocharged | 73346 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.570 (in) Inside Diameter x 0.860 (in) Outside DiameterFlat Washer | View on Amazon |
| ULTRA-POWER Fits: 1.5L L4 Turbocharged | 095015 | 🇺🇸 US 🇨🇦 CA | ID: 0.572"aluminum Gasket | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Drain Plug Gasket parts are listed for the 2019 Honda CR-V, from DORMAN, AJUSA, APEX and 2 other brands. DORMAN 095144 carries the "Popular" badge.
Listed part numbers: DORMAN 095144, AJUSA 22007400 and APEX ADP1909, plus the other parts above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CALORSTAT Fits: 1.5L L4 Turbocharged | OC2335 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Round with Handlewith OE No. 15610REZA00 | View on Amazon |
| DORMAN Fits: 1.5L L4 Turbocharged | 80985 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GATES Fits: 1.5L L4 Turbocharged | 31284 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORAD Fits: 1.5L L4 Turbocharged | MO159 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
4 Oil Filler Cap parts for the 2019 Honda CR-V come from 4 brands — CALORSTAT, DORMAN, GATES and 1 other brand.
Part numbers include CALORSTAT OC2335, DORMAN 80985 and GATES 31284, among others listed above.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: 1.5L L4 Turbocharged | 72226WS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Workshop Oil Filter | View on Amazon |
| FVP Fits: 1.5L L4 Turbocharged | R7356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE# 15400-PLM-A02 | View on Amazon |
| PRO-TEC Fits: 1.5L L4 Turbocharged | PXL57356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VAICO Fits: 1.5L L4 Turbocharged | V240018 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Screwithoutn Filter | View on Amazon |
| VARIOUS MFR Fits: 1.5L L4 Turbocharged | PO4610HN1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Style | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 1.5L L4 Turbocharged | M1110A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
| WIX Popular Fits: 1.5L L4 Turbocharged | 57356XP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular Fits: 1.5L L4 Turbocharged | 3323 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium Oil Filter | View on Amazon |
| WIX Popular Fits: 1.5L L4 Turbocharged | 57356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ACKOJA Fits: 1.5L L4 Turbocharged | A260500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with OE No. 15400PLMA02 | View on Amazon |
| BECK/ARNLEY Fits: 1.5L L4 Turbocharged | 0410812 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HASTINGS / BALDWIN Fits: 1.5L L4 Turbocharged | LF240 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HENGST Fits: 1.5L L4 Turbocharged | H97W05 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Filter Type: Spin-On | View on Amazon |
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | OC707 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On86.00mm Height | View on Amazon |
| MANN Fits: 1.5L L4 Turbocharged | W6103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Anti-Drain Back Valve: NoHeight: 3.54 In | View on Amazon |
| MOTORCRAFT Fits: 1.5L L4 Turbocharged | FL816 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic Oil Application | View on Amazon |
| VARIOUS MFR Fits: 1.5L L4 Turbocharged | PG4612EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
17 Oil Filter parts for the 2019 Honda CR-V come from 14 brands — BOSCH, VARIOUS MFR, WIX and 11 other brands. The "Popular" part is MOBIL M1110A.
The Economy section lists 5 options from BOSCH, FVP, PRO-TEC and 2 other brands — the catalog's value-priced group. BOSCH 72226WS is listed in this group.
The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1110A is listed in this group.
In the Standard Replacement grade, BOSCH, WIX, ACKOJA and 7 other brands supply 10 parts: built to original-equipment specification. A representative part number is BOSCH 3323.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | B33713 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Filter Adapter GasketMolded Rubber | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
One part is listed for the 2019 Honda CR-V — MAHLE / CLEVITE B33713.
Oil Filter Support Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: 1.5L L4 Turbocharged | HA1416938 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Filter Support tubes.
One part is listed for the 2019 Honda CR-V — AUTOTECNICA HA1416938.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 1.5L L4 Turbocharged | A260256 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EX Model or EX-L Model or Touringwith OE No. 112005PAA00 | View on Amazon |
| DORMAN Fits: 1.5L L4 Turbocharged | 264869 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SPECTRA PREMIUM Fits: 1.5L L4 Turbocharged | HOP42A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | GASKET AND/OR SEALANT NOT INCLUDED | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
3 Oil Pan parts are listed for the 2019 Honda CR-V, from ACKOJA, DORMAN and SPECTRA PREMIUM.
Listed part numbers: ACKOJA A260256, DORMAN 264869 and SPECTRA PREMIUM HOP42A.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: 1.5L L4 Turbocharged | 703141410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RTV Silicone | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: VICTOR REINZ 703141410.
Oil Pressure Sender / Switch Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 1.5L L4 Turbocharged | 73196 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Variable Valve Timing (VVT) Oil Pressure Switch | View on Amazon |
This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: FEL-PRO 73196.
Oil Pump
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 1.5L L4 Turbocharged | EP570 | 🇺🇸 US | View on Amazon | |
| MELLING Fits: 1.5L L4 Turbocharged | M570 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 1.5L L4 Turbocharged | OPH54T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
3 Oil Pump parts for the 2019 Honda CR-V come from 3 brands — ENGINETECH, MELLING and TOPLINE.
This group includes ENGINETECH EP570, MELLING M570 and TOPLINE OPH54T.
Oil Pump Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 1.5L L4 Turbocharged | NS99157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| NATIONAL Fits: 1.5L L4 Turbocharged | 99157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WJB / INMOTION PARTS Fits: 1.5L L4 Turbocharged | WS99157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the wear sleeves used to restore a Oil Pump seal surface.
3 Oil Pump Repair Sleeve parts are listed for the 2019 Honda CR-V, from BCA, NATIONAL and WJB / INMOTION PARTS.
Listed part numbers: BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.
Oil Pump Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 1.5L L4 Turbocharged | 711005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WJB / INMOTION PARTS Fits: 1.5L L4 Turbocharged | WS711005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Oil Pump Seal parts are listed for the 2019 Honda CR-V, from NATIONAL and WJB / INMOTION PARTS.
This group includes NATIONAL 711005 and WJB / INMOTION PARTS WS711005.
Piston
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 1.5L L4 Turbocharged | PAH54BE | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Rings | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
One part is listed for the 2019 Honda CR-V — TOPLINE PAH54BE.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 1.5L L4 Turbocharged | RSH54T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
One part is listed for the 2019 Honda CR-V — TOPLINE RSH54T.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 1.5L L4 Turbocharged | C984 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 1.5L L4 Turbocharged | 1081 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 1.5L L4 Turbocharged | C7166 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 1.5L L4 Turbocharged | C1178 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
4 Timing Chain parts are listed for the 2019 Honda CR-V, from CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand.
Part numbers include CLOYES C984, MELLING 1081 and PREFERRED COMPONENTS INC C7166, among others listed above.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PREFERRED COMPONENTS INC Fits: 1.5L L4 Turbocharged | TS17166 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include Cam Sprocket | View on Amazon |
| S.A. GEAR Fits: 1.5L L4 Turbocharged | 76411T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Camshaft Sprocket, Chain, Crank Sprocket, 2 Guides, 2 Tensioner Arms, Tensioner | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 1.5L L4 Turbocharged | 90984SX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include SprocketsIncludes Timing Chain Tensioner, Timing Chain Tensioner Guide (2), Timing Chain Guide (2), Timing Chain | View on Amazon |
| MELLING Popular Fits: 1.5L L4 Turbocharged | 31081S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| CLOYES Fits: 1.5L L4 Turbocharged | 90984S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: Timing Chain Tensioner, Timing Chain Tensioner Guide, Timing Chain Lever, Timing Chain Guide (2), Timing Chain, Crankshaft Sprocket | View on Amazon |
| ENGINETECH Fits: 1.5L L4 Turbocharged | TS3108 | 🇺🇸 US | SILENT TYPE CHAIN | View on Amazon |
| MELLING Fits: 1.5L L4 Turbocharged | 31081SX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include Sprockets | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
7 Timing Chain & Component Kit parts for the 2019 Honda CR-V come from 5 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 2 other brands. The "Popular" part is CLOYES 90984SX.
The Economy section: 2 options from PREFERRED COMPONENTS INC and S.A. GEAR. PREFERRED COMPONENTS INC TS17166 is listed in this group.
Standard Replacement: 5 parts, from CLOYES, MELLING and ENGINETECH. A representative part number is CLOYES 90984SX.
Listed part numbers: CLOYES 90984SX, PREFERRED COMPONENTS INC TS17166 and S.A. GEAR 76411T, plus the other parts above.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Popular Fits: 1.5L L4 Turbocharged | 71259 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| S.A. GEAR Popular Fits: 1.5L L4 Turbocharged | 91342 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmArm | View on Amazon |
| S.A. GEAR Popular Fits: 1.5L L4 Turbocharged | 71258 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| CLOYES Fits: 1.5L L4 Turbocharged | 96140 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LEVER | View on Amazon |
| CLOYES Fits: 1.5L L4 Turbocharged | 96142 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| CLOYES Fits: 1.5L L4 Turbocharged | 96141 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 1.5L L4 Turbocharged | 96139 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmRight | View on Amazon |
| MELLING Fits: 1.5L L4 Turbocharged | BG7044 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| MELLING Fits: 1.5L L4 Turbocharged | BG7045 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| MELLING Fits: 1.5L L4 Turbocharged | BT7058 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Arm | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 1.5L L4 Turbocharged | R70103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 1.5L L4 Turbocharged | R70102 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Arm | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 1.5L L4 Turbocharged | R70104 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| S.A. GEAR Fits: 1.5L L4 Turbocharged | 91344 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerArm Lower | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
14 Timing Chain Guide / Damper parts are listed for the 2019 Honda CR-V, from S.A. GEAR, CLOYES, MELLING and 1 other brand. S.A. GEAR 71259 carries the "Popular" badge.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 1.5L L4 Turbocharged | BT7057 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Oil Filter Included | View on Amazon |
| S.A. GEAR Popular Fits: 1.5L L4 Turbocharged | 91288 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner | View on Amazon |
| CLOYES Fits: 1.5L L4 Turbocharged | 95988 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 1.5L L4 Turbocharged | BT7059 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Pivot Arm | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 1.5L L4 Turbocharged | R70105 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Pivot Arm | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 1.5L L4 Turbocharged | T60310 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Oil Filter Not Included | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
6 Timing Chain Tensioner parts for the 2019 Honda CR-V come from 4 brands — MELLING, PREFERRED COMPONENTS INC, S.A. GEAR and 1 other brand. The "Popular" part is MELLING BT7057.
This group includes MELLING BT7057, S.A. GEAR 91288 and CLOYES 95988 and the remaining parts above.
Timing Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 1.5L L4 Turbocharged | A260180 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EX Model or EX-L Model or Touringwith OE No. 1141059B000 | View on Amazon |
| SKP Fits: 1.5L L4 Turbocharged | SKOP421 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EX Model or EX-L Model or Touring | View on Amazon |
This table covers the Timing covers.
2 Timing Cover parts are listed for the 2019 Honda CR-V, from ACKOJA and SKP.
Part numbers include ACKOJA A260180 and SKP SKOP421.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | 68064 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| SKF Fits: 1.5L L4 Turbocharged | 16896 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 1.5L L4 Turbocharged | 815380700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Timing Cover Seal parts for the 2019 Honda CR-V come from 3 brands — MAHLE / CLEVITE, SKF and VICTOR REINZ.
This group includes MAHLE / CLEVITE 68064, SKF 16896 and VICTOR REINZ 815380700.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 1.5L L4 Turbocharged | S1165 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 1.5L L4 Turbocharged | S1317 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 1.5L L4 Turbocharged | G56402 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 1.5L L4 Turbocharged | S1472 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
4 Timing Crank Sprocket parts for the 2019 Honda CR-V come from 4 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand.
This group includes CLOYES S1165, MELLING S1317 and PREFERRED COMPONENTS INC G56402 and the remaining parts above.
Torque Strut Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 1.5L L4 Turbocharged | 10064 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right Upper | View on Amazon |
| ANCHOR Popular Fits: 1.5L L4 Turbocharged | 10065 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Lower | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 1.5L L4 Turbocharged | A65130 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right Upper | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 1.5L L4 Turbocharged | A65131 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left Lower | View on Amazon |
| PIONEER Fits: 1.5L L4 Turbocharged | 630064 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right Upper | View on Amazon |
| PIONEER Fits: 1.5L L4 Turbocharged | 630065 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Lower | View on Amazon |
| WESTAR Fits: 1.5L L4 Turbocharged | EM7400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Lower | View on Amazon |
| WESTAR Fits: 1.5L L4 Turbocharged | EM7465 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right Upper | View on Amazon |
This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
8 Torque Strut Mount parts are listed for the 2019 Honda CR-V, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 10064 carries the "Popular" badge.
This group includes ANCHOR 10064, ANCHOR 10065 and DEA / MARMON RIDE CONTROL A65130 and the remaining parts above.
Turbocharger
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ROTOMASTER Fits: 1.5L L4 Turbocharged | M1250125N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the turbochargers that compress intake air.
This group shows a single part: ROTOMASTER M1250125N.
Turbocharger Boost Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 1.5L L4 Turbocharged | 5S15125 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HELLA Fits: 1.5L L4 Turbocharged | 009403361 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3-Pin ConnectorBolted | View on Amazon |
This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
2 Turbocharger Boost Sensor parts are listed for the 2019 Honda CR-V, from WELLS and HELLA.
Economy: 1 part, from WELLS. A representative part number is WELLS 5S15125.
The Standard Replacement section: 1 option from HELLA. HELLA 009403361 is listed in this group.
Part numbers include WELLS 5S15125 and HELLA 009403361.
Turbocharger Coolant Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BRUTE POWER Fits: 1.5L L4 Turbocharged | LIN9096 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GATES Fits: 1.5L L4 Turbocharged | TL193 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
2 Turbocharger Coolant Line parts for the 2019 Honda CR-V come from 2 brands — BRUTE POWER and GATES.
Part numbers include BRUTE POWER LIN9096 and GATES TL193.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 Turbocharged | JTC12412 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | F33463 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | GS33953 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetTurbocharger Mounting Gasket Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Turbocharger Gasket parts are listed for the 2019 Honda CR-V, from MAHLE / CLEVITE and AJUSA.
Listed part numbers: AJUSA JTC12412, MAHLE / CLEVITE F33463 and MAHLE / CLEVITE GS33953.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Popular Fits: 1.5L L4 Turbocharged | TL216 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Connecting HoseReturn Line | View on Amazon |
| GATES Popular Fits: 1.5L L4 Turbocharged | TL185 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Turbocharger To HoseReturn Line | View on Amazon |
| ROTOMASTER Popular Fits: 1.5L L4 Turbocharged | M1255101N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supply | View on Amazon |
| BRUTE POWER Fits: 1.5L L4 Turbocharged | LIN9080 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Turbocharger To HoseReturn Line | View on Amazon |
| BRUTE POWER Fits: 1.5L L4 Turbocharged | LIN9081 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supply Line | View on Amazon |
| DORMAN Fits: 1.5L L4 Turbocharged | 667892 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ReturnHose | View on Amazon |
| GATES Fits: 1.5L L4 Turbocharged | TL195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supply Line | View on Amazon |
| ROTOMASTER Fits: 1.5L L4 Turbocharged | M1255202N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return (Lower) | View on Amazon |
| ROTOMASTER Fits: 1.5L L4 Turbocharged | M1255201N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right Upper | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.5L L4 Turbocharged | TIH81 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Inlet | View on Amazon |
| SUNSONG Fits: 1.5L L4 Turbocharged | 5802168 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Returnhose only | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
11 Turbocharger Oil Line parts for the 2019 Honda CR-V come from 6 brands — GATES, ROTOMASTER, BRUTE POWER and 3 other brands. The "Popular" part is GATES TL216.
Turbocharger Wastegate Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: 1.5L L4 Turbocharged | SK6T52372 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
This group shows a single part: SKP SK6T52372.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Fits: 1.5L L4 Turbocharged | VCS177 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket | View on Amazon |
| SKP Fits: 1.5L L4 Turbocharged | SK510A18 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Valve covers.
2 Valve Cover parts are listed for the 2019 Honda CR-V, from APEX and SKP.
Part numbers include APEX VCS177 and SKP SK510A18.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 1.5L L4 Turbocharged | VS50884 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
| AJUSA Fits: 1.5L L4 Turbocharged | 11153500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| APEX Fits: 1.5L L4 Turbocharged | AVC177 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BECK/ARNLEY Fits: 1.5L L4 Turbocharged | 0362057 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 1.5L L4 Turbocharged | VS50965R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Valve Cover Gasket parts for the 2019 Honda CR-V come from 5 brands — MAHLE / CLEVITE, AJUSA, APEX and 2 other brands. The "Popular" part is MAHLE / CLEVITE VS50884.
Listed part numbers: MAHLE / CLEVITE VS50884, AJUSA 11153500 and APEX AVC177, plus the other parts above.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 1.5L L4 Turbocharged | 303136 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake1.630 Overall Length 0.2173 Inside Diameter | View on Amazon |
| SBI Fits: 1.5L L4 Turbocharged | 1403136 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2173 I.D. | View on Amazon |
| TOPLINE Fits: 1.5L L4 Turbocharged | VGH43 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
3 Valve Guide parts for the 2019 Honda CR-V come from 3 brands — QUALCAST, SBI and TOPLINE.
Listed part numbers: QUALCAST 303136, SBI 1403136 and TOPLINE VGH43.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 1.5L L4 Turbocharged | VS2499 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| MELLING Fits: 1.5L L4 Turbocharged | VS2500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
MELLING supplies both parts for the 2019 Honda CR-V.
Part numbers include MELLING VS2499 and MELLING VS2500.
Valve Spring Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 1.5L L4 Turbocharged | VSR729 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Valve Spring retainers.
One part is listed for the 2019 Honda CR-V — MELLING VSR729.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 1.5L L4 Turbocharged | VL1060 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Valve Stem Diameter: 0.215 in | View on Amazon |
| QUALCAST Fits: 1.5L L4 Turbocharged | 345008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1 Round Groove. 0.215 Stem DIA. | View on Amazon |
| SBI Fits: 1.5L L4 Turbocharged | 1211060 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2190 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
3 Valve Spring Retainer Keeper parts are listed for the 2019 Honda CR-V, from MELLING, QUALCAST and SBI.
Part numbers include MELLING VL1060, QUALCAST 345008 and SBI 1211060.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 1.5L L4 Turbocharged | AVS1003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| FEL-PRO Popular Fits: 1.5L L4 Turbocharged | SS702831 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| AJUSA Fits: 1.5L L4 Turbocharged | 57030200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | SS45627 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 1.5L L4 Turbocharged | SS45626 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| QUALCAST Fits: 1.5L L4 Turbocharged | 3859255 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Viton Metal Clad | View on Amazon |
| SBI Fits: 1.5L L4 Turbocharged | 1221202 | 🇺🇸 US 🇨🇦 CA | ExhaustViton Material | View on Amazon |
| SBI Fits: 1.5L L4 Turbocharged | 1221201 | 🇺🇸 US 🇨🇦 CA | IntakeViton Material | View on Amazon |
| TOPLINE Fits: 1.5L L4 Turbocharged | VSSH21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
9 Valve Stem Seal parts for the 2019 Honda CR-V come from 7 brands — MAHLE / CLEVITE, SBI, APEX and 4 other brands. The "Popular" part is APEX AVS1003.
Part numbers include APEX AVS1003, FEL-PRO SS702831 and AJUSA 57030200, among others listed above.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 1.5L L4 Turbocharged | 916559 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Exhaustor Intake | View on Amazon |
| GATES Fits: 1.5L L4 Turbocharged | VVS383 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HOLSTEIN Fits: 1.5L L4 Turbocharged | 2VTS0479 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Solenoid Valve | View on Amazon |
| WELLS Fits: 1.5L L4 Turbocharged | 2T1277 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 1.5L L4 Turbocharged | VVT363 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BECK/ARNLEY Fits: 1.5L L4 Turbocharged | 0242203 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| CLOYES Fits: 1.5L L4 Turbocharged | VTS232 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
7 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2019 Honda CR-V come from 7 brands — DORMAN, GATES, HOLSTEIN and 4 other brands. The "Popular" part is DORMAN 916559.
The Economy section: 4 options from DORMAN, GATES, HOLSTEIN and 1 other brand. DORMAN 916559 is listed in this group.
Standard Replacement: 3 parts, from STANDARD MOTOR PRODUCTS, BECK/ARNLEY and CLOYES. A representative part number is STANDARD MOTOR PRODUCTS VVT363.
Listed part numbers: DORMAN 916559, GATES VVS383 and HOLSTEIN 2VTS0479, plus the other parts above.
Variable Valve Timing (VVT) Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 1.5L L4 Turbocharged | A260057 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EX Model or EX-L Model or Touringwith OE No. 1431059B004 | View on Amazon |
| ACKOJA Fits: 1.5L L4 Turbocharged | A260058 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EX Model or EX-L Model or Touringwith OE No. 1432059B004 | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.5L L4 Turbocharged | VVT867 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Number of Teeth: 45 | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.5L L4 Turbocharged | VVT864 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
4 Variable Valve Timing (VVT) Sprocket parts for the 2019 Honda CR-V come from 2 brands — ACKOJA and STANDARD MOTOR PRODUCTS.
This group includes ACKOJA A260057, ACKOJA A260058 and STANDARD MOTOR PRODUCTS VVT867 and the remaining parts above.
Variable Valve Timing (VVT) Sprocket Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 1.5L L4 Turbocharged | VCB132 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Variable Valve Timing (VVT) Sprocket bolts.
One part is listed for the 2019 Honda CR-V — CLOYES VCB132.
Buying Engine Parts for a 2019 Honda CR-V
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2019 Honda CR-V?
Our catalog currently lists 257 engine parts for the 2019 Honda CR-V across 57 subcategories and 60 brands, covering both the 1.5L L4 Turbocharged and the 2.4L L4. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2019 Honda CR-V engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2019 Honda CR-V?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2019 Honda CR-V?
Oil rows on this page include SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 Honda CR-V was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2019 Honda CR-V?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2019 Honda CR-V
Engine Parts for Other Honda CR-V Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.