2022 Honda CR-V Engine Parts

This table covers the chains that drive the balance shafts. Read more

3 Balance Shaft Chain parts are listed for the 2022 Honda CR-V, from S.A. GEAR and INA.

Part numbers include INA ZC1021320, S.A. GEAR C1180 and S.A. GEAR 76413P.

This table covers the guides that keep the balance-shaft chain on its path. Read more

One part is listed for the 2022 Honda CR-V — S.A. GEAR 71262.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: S.A. GEAR 91347.

This table covers the Balance Shaft sprockets. Read more

One part is listed for the 2022 Honda CR-V — S.A. GEAR S1474.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2022 Honda CR-V — TOPLINE RBH54T.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 2022 Honda CR-V, from AJUSA, MAHLE / CLEVITE and TOPLINE.

This group includes AJUSA 54280700, AJUSA 54337000 and MAHLE / CLEVITE CS55383 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts for the 2022 Honda CR-V come from TOPLINE.

This group includes TOPLINE MBH54T, TOPLINE TWH54T and TOPLINE TWH36.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts for the 2022 Honda CR-V come from 5 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO BS40800.

Part numbers include FEL-PRO BS40800, MAHLE / CLEVITE 68080 and AJUSA 15097100, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2022 Honda CR-V, from AJUSA, FEL-PRO and TOPLINE.

Listed part numbers: AJUSA 81072000, FEL-PRO ES73404 and TOPLINE HBH54T.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts are listed for the 2022 Honda CR-V, from AJUSA and FEL-PRO.

This group includes AJUSA 10236600 and FEL-PRO 26839PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 2022 Honda CR-V, from TOPLINE and AJUSA.

This group includes AJUSA 52524500, TOPLINE HSH54TA and TOPLINE HSH54T.

This table covers the Engine covers. Read more

5 Engine Cover parts are listed for the 2022 Honda CR-V, from TECHPRO and VARIOUS MFR. TECHPRO HO1228150 carries the "Popular" badge.

Part numbers include TECHPRO HO1228150, TECHPRO HO1228157 and TECHPRO HO1228180, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2022 Honda CR-V, from AJUSA and TOPLINE.

This group includes AJUSA 50477900 and TOPLINE CGSH54TA.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 2022 Honda CR-V come from 3 brands — MELLING, QUALCAST and TOPLINE.

Part numbers include MELLING V5839, QUALCAST 1030539 and TOPLINE EVH54T.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts are listed for the 2022 Honda CR-V, from ATP and PIONEER.

Listed part numbers: ATP 102139 and PIONEER DA2139.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 2022 Honda CR-V, from AJUSA, FEL-PRO and MAHLE / CLEVITE.

This group includes AJUSA 13293200, FEL-PRO MS97619 and MAHLE / CLEVITE MS20396.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2022 Honda CR-V come from 3 brands — MELLING, QUALCAST and TOPLINE.

Part numbers include MELLING V5840, QUALCAST 1030540 and TOPLINE IVH54T.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2022 Honda CR-V come from 5 brands — DEA / MARMON RIDE CONTROL, ANCHOR, BECK/ARNLEY and 2 other brands. The "Popular" part is DEA / MARMON RIDE CONTROL A65114.

This group includes DEA / MARMON RIDE CONTROL A65114, ANCHOR 10093 and BECK/ARNLEY 1042461 and the remaining parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300888.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

37 Oil parts for the 2022 Honda CR-V come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 30 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2022 Honda CR-V come from 3 brands — DORMAN, REIN and SKP.

Listed part numbers: DORMAN 090033, DORMAN 090053 and REIN HWU0110, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2022 Honda CR-V, from AJUSA, DORMAN, FEL-PRO and 1 other brand.

Part numbers include AJUSA 22007400, DORMAN 095144 and FEL-PRO 73346, among others listed above.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2022 Honda CR-V come from 3 brands — CALORSTAT, GATES and MOTORAD.

Listed part numbers: CALORSTAT OC2335, GATES 31284 and MOTORAD MO159.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

14 Oil Filter parts for the 2022 Honda CR-V come from 11 brands — BOSCH, VARIOUS MFR, WIX and 8 other brands. The "Popular" part is WIX 57356XP.

The Economy section lists 4 options from BOSCH, FVP, PRO-TEC and 1 other brand — the catalog's value-priced group. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57356XP is listed in this group.

In the Standard Replacement grade, BOSCH, WIX, BECK/ARNLEY and 5 other brands supply 8 parts: built to original-equipment specification. A representative part number is BOSCH 3323.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2022 Honda CR-V — MAHLE / CLEVITE B33713.

This table covers the oil pans that hold the engine's oil sump. Read more

One part is listed for the 2022 Honda CR-V — SPECTRA PREMIUM HOP42A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts for the 2022 Honda CR-V come from 3 brands — ENGINETECH, MELLING and TOPLINE.

This group includes ENGINETECH EP570, MELLING M570 and TOPLINE OPH54T.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 2022 Honda CR-V — TOPLINE PAH54BE.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 2022 Honda CR-V — TOPLINE RSH54T.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts are listed for the 2022 Honda CR-V, from CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand.

This group includes CLOYES C984, MELLING 1081 and PREFERRED COMPONENTS INC C7166 and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

7 Timing Chain & Component Kit parts for the 2022 Honda CR-V come from 5 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 2 other brands. The "Popular" part is CLOYES 90984SX.

The Economy section: 2 options from PREFERRED COMPONENTS INC and S.A. GEAR. PREFERRED COMPONENTS INC TS17166 is listed in this group.

Standard Replacement: 5 parts, from CLOYES, MELLING and ENGINETECH. A representative part number is CLOYES 90984SX.

Listed part numbers: CLOYES 90984SX, PREFERRED COMPONENTS INC TS17166 and S.A. GEAR 76411T, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

14 Timing Chain Guide / Damper parts are listed for the 2022 Honda CR-V, from S.A. GEAR, CLOYES, MELLING and 1 other brand. S.A. GEAR 71259 carries the "Popular" badge.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts for the 2022 Honda CR-V come from 4 brands — MELLING, PREFERRED COMPONENTS INC, S.A. GEAR and 1 other brand. The "Popular" part is MELLING BT7057.

This group includes MELLING BT7057, S.A. GEAR 91288 and CLOYES 95988 and the remaining parts above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 2022 Honda CR-V come from 2 brands — MAHLE / CLEVITE and SKF.

Part numbers include MAHLE / CLEVITE 68064 and SKF 16896.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts for the 2022 Honda CR-V come from 4 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand.

Part numbers include CLOYES S1165, MELLING S1317 and PREFERRED COMPONENTS INC G56402, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Torque Strut Mount parts are listed for the 2022 Honda CR-V, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 10064 carries the "Popular" badge.

This group includes ANCHOR 10064, ANCHOR 10065 and DEA / MARMON RIDE CONTROL A65130 and the remaining parts above.

This table covers the turbochargers that compress intake air. Read more

This group shows a single part: ROTOMASTER M1250125N.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Turbocharger Boost Sensor parts are listed for the 2022 Honda CR-V, from WELLS and HELLA.

Economy: 1 part, from WELLS. A representative part number is WELLS 5S15125.

The Standard Replacement section: 1 option from HELLA. HELLA 009403361 is listed in this group.

Listed part numbers: WELLS 5S15125 and HELLA 009403361.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Turbocharger Gasket parts are listed for the 2022 Honda CR-V, from MAHLE / CLEVITE and AJUSA.

Listed part numbers: AJUSA JTC12412, MAHLE / CLEVITE F33463 and MAHLE / CLEVITE GS33953.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

5 Turbocharger Oil Line parts for the 2022 Honda CR-V come from 3 brands — ROTOMASTER, DORMAN and SUNSONG. The "Popular" part is ROTOMASTER M1255101N.

Part numbers include ROTOMASTER M1255101N, DORMAN 667892 and ROTOMASTER M1255202N, among others listed above.

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: SKP SK6T52372.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts for the 2022 Honda CR-V come from 4 brands — AJUSA, BECK/ARNLEY, FEL-PRO and 1 other brand.

This group includes AJUSA 11153500, BECK/ARNLEY 0362057 and FEL-PRO VS50965R and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts for the 2022 Honda CR-V come from 3 brands — QUALCAST, SBI and TOPLINE.

Part numbers include QUALCAST 303136, SBI 1403136 and TOPLINE VGH43.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

MELLING supplies both parts for the 2022 Honda CR-V.

Listed part numbers: MELLING VS2499 and MELLING VS2500.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2022 Honda CR-V — MELLING VSR729.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts are listed for the 2022 Honda CR-V, from MELLING, QUALCAST and SBI.

This group includes MELLING VL1060, QUALCAST 345008 and SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Valve Stem Seal parts for the 2022 Honda CR-V come from 6 brands — MAHLE / CLEVITE, SBI, FEL-PRO and 3 other brands. The "Popular" part is FEL-PRO SS702831.

Part numbers include FEL-PRO SS702831, MAHLE / CLEVITE SS45626 and AJUSA 57030200, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2022 Honda CR-V come from 5 brands — GATES, HOLSTEIN, WELLS and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS VVT363.

The Economy section: 3 options from GATES, HOLSTEIN and WELLS. GATES VVS383 is listed in this group.

Standard Replacement: 2 parts, from STANDARD MOTOR PRODUCTS and CLOYES. A representative part number is STANDARD MOTOR PRODUCTS VVT363.

Listed part numbers: STANDARD MOTOR PRODUCTS VVT363, GATES VVS383 and HOLSTEIN 2VTS0479, plus the other parts above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: ACKOJA A260057.