2006 Hyundai Tucson Engine Parts

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2006 Hyundai Tucson — ELRING 725780.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

6 Camshaft Repair Sleeve parts for the 2006 Hyundai Tucson come from 6 brands — NATIONAL, SKF, BCA and 3 other brands. The "Popular" part is NATIONAL 99139.

Listed part numbers: NATIONAL 99139 and BCA NS99139, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Camshaft Seal parts for the 2006 Hyundai Tucson come from 12 brands — NATIONAL, SKF, TIMKEN and 9 other brands. The "Popular" part is NATIONAL 3771.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 2006 Hyundai Tucson, from ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand.

Part numbers include ENGINETECH BB1007, ITM ENGINE COMPONENTS 4B9644 and KING ENGINE BEARINGS CR4235AM, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2006 Hyundai Tucson, from ENGINETECH, AJUSA, APEX and 2 other brands. ENGINETECH HY20CSA carries the "Popular" badge.

This group includes ENGINETECH HY20CSA, AJUSA 54120000 and APEX ACS2031 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2006 Hyundai Tucson come from 4 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is ENGINETECH BC1040.

Listed part numbers: ENGINETECH BC1040, ITM ENGINE COMPONENTS 5M9517 and KING ENGINE BEARINGS MB5256AM, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2006 Hyundai Tucson come from 5 brands — BCA, NATIONAL, SCHAEFFLER and 2 other brands. The "Popular" part is BCA NS99315.

Part numbers include BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

26 Crankshaft Seal parts for the 2006 Hyundai Tucson come from 15 brands — VICTOR REINZ, ELRING, FEL-PRO and 12 other brands. The "Popular" part is ELRING 902760. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

11 Cylinder Head Bolt parts are listed for the 2006 Hyundai Tucson, from HYUNDAI, ENGINETECH, FEL-PRO and 7 other brands. ENGINETECH HB232 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2006 Hyundai Tucson, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX AHG268 carries the "Popular" badge.

This group includes APEX AHG268, FEL-PRO 26181PT and AJUSA 10141800 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Cylinder Head Gasket Set parts are listed for the 2006 Hyundai Tucson, from ENGINETECH, FEL-PRO, VICTOR REINZ and 5 other brands. APEX AHS2068 carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 2006 Hyundai Tucson, from ENGINETECH and SBI.

Part numbers include ENGINETECH CHS1047 and SBI 2302136.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11402.

This table covers the Engine covers. Read more

One part is listed for the 2006 Hyundai Tucson — TECHPRO HY1228157.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Engine Kit Gasket Set parts are listed for the 2006 Hyundai Tucson, from APEX, ITM ENGINE COMPONENTS, AJUSA and 5 other brands. APEX AFS2068 carries the "Popular" badge.

Listed part numbers: APEX AFS2068, ITM ENGINE COMPONENTS 0900839 and AJUSA 50285400, plus the other parts above.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2006 Hyundai Tucson — ENGINETECH RCHY20AP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts for the 2006 Hyundai Tucson come from 5 brands — ENGINETECH, ITM ENGINE COMPONENTS, MELLING and 2 other brands. The "Popular" part is ENGINETECH EM1003.

Listed part numbers: ENGINETECH EM1003, ITM ENGINE COMPONENTS RX9641 and MELLING V0817, plus the other parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Expansion Plug parts are listed for the 2006 Hyundai Tucson, from ENGINETECH and TOPLINE.

This group includes ENGINETECH PK914 and TOPLINE EPSMI4.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

8 Harmonic Balancer parts are listed for the 2006 Hyundai Tucson, from HYUNDAI, ATP, SKP and 3 other brands. HYUNDAI 2312423772 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594546.

The Standard Replacement section lists 6 options from HYUNDAI, ATP, DAYCO and 1 other brand — built to original-equipment specification. HYUNDAI 2312423772 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes HYUNDAI 2312423772, SKP SK594546 and HYUNDAI 2312423510 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts are listed for the 2006 Hyundai Tucson, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 5 other brands. FEL-PRO MS96275 carries the "Popular" badge.

Part numbers include FEL-PRO MS96275, MAHLE / CLEVITE MS19326 and AJUSA 13174400, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2006 Hyundai Tucson come from 7 brands — HYUNDAI, MELLING, ENGINETECH and 4 other brands. The "Popular" part is HYUNDAI 2221123600.

Listed part numbers: HYUNDAI 2221123600, MELLING V0816 and ENGINETECH IM1002, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

19 Motor Mount parts for the 2006 Hyundai Tucson come from 7 brands — ANCHOR, WESTAR, BECK/ARNLEY and 4 other brands. The "Popular" part is ANCHOR 9338.

The Economy section: 2 options from FAMOUS BRAND. FAMOUS BRAND 2010501090 is listed in this group.

Standard Replacement: 16 parts, from ANCHOR, WESTAR, BECK/ARNLEY and 3 other brands. A representative part number is ANCHOR 9338.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL A4127.

This table covers the Motor Mount kits. Read more

4 Motor Mount Kit parts for the 2006 Hyundai Tucson come from 2 brands — ANCHOR and WESTAR.

Listed part numbers: ANCHOR 300163, ANCHOR 300164 and WESTAR ETK099, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

25 Oil parts for the 2006 Hyundai Tucson come from 3 brands — MOBIL, VALVOLINE and IDEMITSU. The "Popular" part is MOBIL 125195.

The Conventional section lists 2 options from VALVOLINE — grouped under the catalog's "Conventional" designation — the notes column spells out what sets them apart. VALVOLINE 797671 is listed in this group.

The Full Synthetic section lists 10 options from MOBIL — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, MOBIL and VALVOLINE supply 9 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125202.

The Racing section lists 1 option from IDEMITSU — grouped under the catalog's "Racing" designation — the notes column spells out what sets them apart. IDEMITSU 30018100750 is listed in this group.

The Synthetic Blend section lists 3 options from MOBIL — synthetic-blend oils. MOBIL 124406 is listed in this group.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2006 Hyundai Tucson.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

11 Oil Drain Plug parts for the 2006 Hyundai Tucson come from 7 brands — DORMAN, ELRING, AGS and 4 other brands. The "Popular" part is AGS ODP00007.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Oil Drain Plug Gasket parts are listed for the 2006 Hyundai Tucson, from DORMAN, FEL-PRO, ACKOJA and 4 other brands. DORMAN 095147 carries the "Popular" badge.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2006 Hyundai Tucson come from 4 brands — GATES, HYUNDAI, MOTORAD and 1 other brand.

Listed part numbers: GATES 31109, HYUNDAI 2651026600 and MOTORAD MO81, plus the other parts above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2006 Hyundai Tucson — ELRING 453020.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts for the 2006 Hyundai Tucson come from 16 brands — BOSCH, VARIOUS MFR, WIX and 13 other brands. The "Popular" part is WIX 51334XP.

The Economy section: 5 options from BOSCH, FRAM, FVP and 2 other brands. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

Standard Replacement: 13 parts, from HYUNDAI, BOSCH, DENSO and 9 other brands. A representative part number is BOSCH 3312.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2006 Hyundai Tucson, from SKP, ATP, DORMAN and 2 other brands. SKP SK264605 carries the "Popular" badge.

Part numbers include SKP SK264605, ATP 103235 and DORMAN 264605, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts for the 2006 Hyundai Tucson come from 5 brands — SKP, MELLING, ENGINETECH and 2 other brands. The "Popular" part is MELLING M272.

The Economy section: 1 option from SKP. SKP SKOM272 is listed in this group.

Standard Replacement: 3 parts, from MELLING, ENGINETECH and ITM ENGINE COMPONENTS. A representative part number is MELLING M272.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include MELLING M272, SKP SKOM272 and ENGINETECH EP003, among others listed above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pump Gasket parts are listed for the 2006 Hyundai Tucson, from ELRING, FEL-PRO, HYUNDAI and 1 other brand.

Part numbers include ELRING 694370, FEL-PRO 72983 and HYUNDAI 2141123000, among others listed above.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2006 Hyundai Tucson — HYUNDAI 2142123020.

This table covers the Oil Temperature senders. Read more

One part is listed for the 2006 Hyundai Tucson — WELLS 5S7694.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

4 Piston parts are listed for the 2006 Hyundai Tucson, from MAHLE / CLEVITE, ENGINETECH, TOPLINE and 1 other brand.

The Premium section lists 1 option from MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. MAHLE / CLEVITE 2244007 is listed in this group.

The Standard Replacement section: 2 options from ENGINETECH and TOPLINE. ENGINETECH K48384P is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: MAHLE / CLEVITE 2244007, ENGINETECH K48384P and TOPLINE PAHY5L, plus the other parts above.