2007 Kia Rio Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 2007 Kia Rio — HYUNDAI 2420026704.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

5 Camshaft Plug parts are listed for the 2007 Kia Rio, from FEL-PRO, ELRING, HYUNDAI and 2 other brands. FEL-PRO CP75023 carries the "Popular" badge.

Listed part numbers: FEL-PRO CP75023, ELRING 725780 and HYUNDAI 2232735504, plus the other parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

6 Camshaft Repair Sleeve parts for the 2007 Kia Rio come from 6 brands — NATIONAL, SKF, BCA and 3 other brands. The "Popular" part is NATIONAL 99139.

This group includes NATIONAL 99139 and BCA NS99139 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts for the 2007 Kia Rio come from 13 brands — ELRING, NATIONAL, SKF and 10 other brands. The "Popular" part is NATIONAL 3771.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts for the 2007 Kia Rio come from 2 brands — APEX and ELRING.

This group includes APEX ACP203 and ELRING 372780.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2007 Kia Rio — TOPLINE CRHY2.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 2007 Kia Rio, from ITM ENGINE COMPONENTS, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: ITM ENGINE COMPONENTS 4B9643, KING ENGINE BEARINGS CR4655AM and MAHLE / CLEVITE CB1979A4, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2007 Kia Rio, from FEL-PRO, ITM ENGINE COMPONENTS, AJUSA and 3 other brands. FEL-PRO CS262241 carries the "Popular" badge.

Part numbers include FEL-PRO CS262241, ITM ENGINE COMPONENTS 0921905 and AJUSA 54130100, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2007 Kia Rio come from 4 brands — AUTO 7, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is ITM ENGINE COMPONENTS 5M9516.

This group includes ITM ENGINE COMPONENTS 5M9516, AUTO 7 6000263 and AUTO 7 6000266 and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2007 Kia Rio come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Crankshaft Seal parts for the 2007 Kia Rio come from 12 brands — ELRING, FEL-PRO, APEX and 9 other brands. The "Popular" part is ELRING 902760.

This table covers the bolts that clamp the cylinder head to the block. Read more

10 Cylinder Head Bolt parts are listed for the 2007 Kia Rio, from AJUSA, ENGINETECH, APEX and 7 other brands. AJUSA 81029900 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 2007 Kia Rio, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 5 other brands. FEL-PRO 26224PT carries the "Popular" badge.

Listed part numbers: FEL-PRO 26224PT, MAHLE / CLEVITE 54484 and AJUSA 10183100, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Cylinder Head Gasket Set parts are listed for the 2007 Kia Rio, from ENGINETECH, FEL-PRO, AJUSA and 8 other brands. ENGINETECH HY16HSB carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2007 Kia Rio — SBI 2302190.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11485.

This table covers the Engine covers. Read more

TECHPRO supplies both parts for the 2007 Kia Rio.

Listed part numbers: TECHPRO KI1228107 and TECHPRO KI1228108.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2007 Kia Rio, from ITM ENGINE COMPONENTS, AJUSA, ELRING and 2 other brands. ITM ENGINE COMPONENTS 0900880 carries the "Popular" badge.

This group includes ITM ENGINE COMPONENTS 0900880, AJUSA 50287500 and ELRING 779460 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts for the 2007 Kia Rio come from 7 brands — HYUNDAI, ITM ENGINE COMPONENTS, ENGINETECH and 4 other brands. The "Popular" part is HYUNDAI 2221226050.

This group includes HYUNDAI 2221226050, ITM ENGINE COMPONENTS RX9642 and ENGINETECH EM4421 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2007 Kia Rio — TOPLINE EPSC11.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts are listed for the 2007 Kia Rio, from SKP, HL MANDO, ATP and 3 other brands. SKP SK594053 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594053.

The Standard Replacement section lists 5 options from HL MANDO, ATP, DAYCO and 2 other brands — built to original-equipment specification. HL MANDO 30A5012 is listed in this group.

Listed part numbers: SKP SK594053, HL MANDO 30A5012 and ATP 102152, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2007 Kia Rio, from FEL-PRO, VICTOR REINZ, AJUSA and 3 other brands. FEL-PRO MS96331 carries the "Popular" badge.

This group includes FEL-PRO MS96331, VICTOR REINZ 711010100 and AJUSA 13224200 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2007 Kia Rio come from 7 brands — HYUNDAI, MELLING, ENGINETECH and 4 other brands. The "Popular" part is HYUNDAI 2221126600.

This group includes HYUNDAI 2221126600, MELLING V3047 and ENGINETECH IM4420 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

19 Motor Mount parts for the 2007 Kia Rio come from 8 brands — SKP, ANCHOR, BECK/ARNLEY and 5 other brands. The "Popular" part is SKP SKM9309.

The Economy section: 3 options from SKP. SKP SKM9309 is listed in this group.

Standard Replacement: 16 parts, from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 4 other brands. A representative part number is HYUNDAI 219101G000.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2007 Kia Rio come from 2 brands — ANCHOR and WESTAR.

This group includes ANCHOR 300385 and WESTAR ETK071.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

93 Oil parts for the 2007 Kia Rio come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is MOBIL 125195. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 52 parts.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2007 Kia Rio.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

11 Oil Drain Plug parts for the 2007 Kia Rio come from 7 brands — DORMAN, ELRING, AGS and 4 other brands. The "Popular" part is AGS ODP00007.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Drain Plug Gasket parts are listed for the 2007 Kia Rio, from DORMAN, ACKOJA, ELRING and 2 other brands. DORMAN 095147 carries the "Popular" badge.

Part numbers include DORMAN 095147, DORMAN 095144 and ACKOJA A532804, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2007 Kia Rio come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand.

Part numbers include CALORSTAT OC2331, GATES 31083 and MOTORAD MO81, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts for the 2007 Kia Rio come from 16 brands — BOSCH, VARIOUS MFR, WIX and 13 other brands. The "Popular" part is WIX 51334XP.

The Economy section: 5 options from BOSCH, FRAM, FVP and 2 other brands. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

Standard Replacement: 13 parts, from HYUNDAI, BOSCH, DENSO and 9 other brands. A representative part number is BOSCH 3312.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts are listed for the 2007 Kia Rio, from DORMAN and SPECTRA PREMIUM.

Part numbers include DORMAN 264043 and SPECTRA PREMIUM HYP17A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts for the 2007 Kia Rio come from 5 brands — VICTOR REINZ, FEL-PRO, APEX and 2 other brands. The "Popular" part is FEL-PRO OS30780.

Part numbers include FEL-PRO OS30780, VICTOR REINZ 703141410 and APEX AOP290, among others listed above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts for the 2007 Kia Rio come from 5 brands — SKP, MELLING, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is MELLING M270.

The Economy section: 1 option from SKP. SKP SKPM270 is listed in this group.

Standard Replacement: 4 parts, from MELLING, ITM ENGINE COMPONENTS, PIERBURG and 1 other brand. A representative part number is MELLING M270.

Listed part numbers: MELLING M270, SKP SKPM270 and ITM ENGINE COMPONENTS 0571528, plus the other parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2007 Kia Rio — ELRING 726660.

This table covers the pickup tubes and screens that feed the oil pump. Read more

2 Oil Pump Pickup Tube / Screen parts are listed for the 2007 Kia Rio, from MELLING and SEALED POWER.

This group includes MELLING 399S and SEALED POWER 22415093.