2022 Kia Rio Engine Parts

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2022 Kia Rio — CLOYES 96213.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: TOPLINE RBHY22T.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 2022 Kia Rio come from 2 brands — AJUSA and TOPLINE.

Part numbers include AJUSA 54244600 and TOPLINE CBSHY26.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

TOPLINE supplies both parts for the 2022 Kia Rio.

Part numbers include TOPLINE MBHY26 and TOPLINE TWHY26.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Crankshaft Seal parts are listed for the 2022 Kia Rio, from AJUSA and FEL-PRO.

This group includes AJUSA 15096500, AJUSA 15096400 and FEL-PRO BS40740.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2022 Kia Rio come from 2 brands — AJUSA and TOPLINE.

Listed part numbers: AJUSA 81061400 and TOPLINE HBHY26.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 10197100.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2022 Kia Rio come from 2 brands — AJUSA and TOPLINE.

Listed part numbers: AJUSA 52573500 and TOPLINE HSHY26M.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO KI1228194.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2022 Kia Rio come from 2 brands — AJUSA and TOPLINE.

Part numbers include AJUSA 50525400 and TOPLINE CGSHY26M.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2022 Kia Rio — TOPLINE EVHY26.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

This group shows a single part: HL MANDO 30A5025.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 2022 Kia Rio come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 13275000 and ELRING B06380.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2022 Kia Rio — TOPLINE IVHY26.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2022 Kia Rio — ANCHOR 10381.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

40 Oil parts are listed for the 2022 Kia Rio, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 33 parts.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts are listed for the 2022 Kia Rio, from DORMAN, REIN and SKP.

This group includes DORMAN 090033, DORMAN 090053 and REIN HWU0110 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts for the 2022 Kia Rio come from 2 brands — DORMAN and AJUSA.

Part numbers include AJUSA 22007100, DORMAN 095147 and DORMAN 995147CD.

This table covers the caps on the oil filler neck. Read more

MOTORAD supplies both parts for the 2022 Kia Rio.

This group includes MOTORAD MO151 and MOTORAD MO223.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

11 Oil Filter parts are listed for the 2022 Kia Rio, from VARIOUS MFR, PRO-TEC, CHAMP / LUBER-FINER and 6 other brands. PRO-TEC PXL10473 carries the "Popular" badge.

In the Economy grade, PRO-TEC, VARIOUS MFR, CHAMP / LUBER-FINER and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is PRO-TEC PXL10473.

The Standard Replacement section lists 7 options from VARIOUS MFR, WIX, BECK/ARNLEY and 3 other brands — built to original-equipment specification. WIX WL10473 is listed in this group.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts for the 2022 Kia Rio come from 2 brands — AUTOTECNICA and MOTORAD.

Listed part numbers: AUTOTECNICA HY1422872 and MOTORAD MO387.

This table covers the Oil Filter housings. Read more

This group shows a single part: SKP SK263002.

This table covers the oil pans that hold the engine's oil sump. Read more

This group shows a single part: SPECTRA PREMIUM HYP18A.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2022 Kia Rio — TOPLINE OPHY26M.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: CLOYES C541.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: TOPLINE PAHY26M.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: TOPLINE RSHY26.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts for the 2022 Kia Rio come from CLOYES.

Part numbers include CLOYES C531 and CLOYES C540.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts are listed for the 2022 Kia Rio, from CLOYES and INA.

Part numbers include CLOYES 90531SX, CLOYES 90540SX and INA ZC76305.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts for the 2022 Kia Rio come from CLOYES. The "Popular" part is CLOYES 96214.

This group includes CLOYES 96214, CLOYES 96216 and CLOYES 96183 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

CLOYES supplies both parts for the 2022 Kia Rio.

This group includes CLOYES 96212 and CLOYES 95559.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts for the 2022 Kia Rio come from 2 brands — ANCHOR and PIONEER.

Part numbers include ANCHOR 10187 and PIONEER 630003.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2022 Kia Rio — AJUSA 56082200.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

TOPLINE supplies both parts for the 2022 Kia Rio.

This group includes TOPLINE EVGHY26 and TOPLINE IVGHY26.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2022 Kia Rio — TOPLINE LIFHY23.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts for the 2022 Kia Rio come from 2 brands — MELLING and SBI.

Part numbers include MELLING VL1060 and SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts are listed for the 2022 Kia Rio, from AJUSA, FEL-PRO and TOPLINE. FEL-PRO SS72939 carries the "Popular" badge.

Listed part numbers: FEL-PRO SS72939, AJUSA 57070400 and AJUSA 12030100, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

8 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2022 Kia Rio, from HYUNDAI, DORMAN, SKP and 3 other brands. DORMAN 918024 carries the "Popular" badge.

Economy: 4 parts, from DORMAN, SKP, HOLSTEIN and 1 other brand. A representative part number is DORMAN 918024.

The Standard Replacement section: 4 options from HYUNDAI and STANDARD MOTOR PRODUCTS. HYUNDAI 2435508000 is listed in this group.

Listed part numbers: DORMAN 918024, SKP SK918024 and HOLSTEIN 2VTS0026, plus the other parts above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

One part is listed for the 2022 Kia Rio — HYUNDAI 243502M010.