2019 Kia Rio Engine Parts

This table covers the camshafts that open the valves. Read more

This group shows a single part: HYUNDAI 241002B660.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts for the 2019 Kia Rio come from 2 brands — HYUNDAI and TOPLINE.

Part numbers include HYUNDAI 235102B010 and TOPLINE CRHY22.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts for the 2019 Kia Rio come from 5 brands — ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 2 other brands. The "Popular" part is ENGINETECH BB1430.

Listed part numbers: ENGINETECH BB1430, ITM ENGINE COMPONENTS 4B1631 and KING ENGINE BEARINGS CR4575SM, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2019 Kia Rio come from 5 brands — ELRING, AJUSA, ENGINETECH and 2 other brands. The "Popular" part is AJUSA 54244600.

Listed part numbers: AJUSA 54244600, ENGINETECH HY16CSB and APEX ACS13014, plus the other parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: TOPLINE CSHY22L.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts are listed for the 2019 Kia Rio, from TOPLINE, ENGINETECH and KING ENGINE BEARINGS.

Listed part numbers: ENGINETECH BC1017, KING ENGINE BEARINGS MB5706SI and TOPLINE TWHY22, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

One part is listed for the 2019 Kia Rio — WJB / INMOTION PARTS WS99103.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Crankshaft Seal parts are listed for the 2019 Kia Rio, from ELRING, VICTOR REINZ, FEL-PRO and 4 other brands. FEL-PRO TCS46166 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts for the 2019 Kia Rio come from 5 brands — AJUSA, APEX, ELRING and 2 other brands. The "Popular" part is AJUSA 81061400.

This group includes AJUSA 81061400, APEX AHB1326 and ELRING 711550 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 2019 Kia Rio come from 7 brands — FEL-PRO, ITM ENGINE COMPONENTS, AJUSA and 4 other brands. The "Popular" part is FEL-PRO 26554PT.

This group includes FEL-PRO 26554PT, ITM ENGINE COMPONENTS 0941132 and AJUSA 10197100 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Cylinder Head Gasket Set parts for the 2019 Kia Rio come from 6 brands — ENGINETECH, AJUSA, ELRING and 3 other brands. The "Popular" part is ENGINETECH HY16HSCWB.

Listed part numbers: ENGINETECH HY16HSCWB, ITM ENGINE COMPONENTS 0910929 and AJUSA 52573500, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2019 Kia Rio.

Listed part numbers: KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO KI1228161.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 2019 Kia Rio come from 4 brands — ELRING, ITM ENGINE COMPONENTS, ENGINETECH and 1 other brand. The "Popular" part is ITM ENGINE COMPONENTS 0900322.

Listed part numbers: ITM ENGINE COMPONENTS 0900322, ELRING 925630 and ELRING 550130, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 2019 Kia Rio, from HYUNDAI, MELLING and TOPLINE.

This group includes HYUNDAI 222122B000, MELLING V5566 and TOPLINE EVHY22.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

This group shows a single part: WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 2019 Kia Rio come from 4 brands — ATP, HL MANDO, PIONEER and 1 other brand.

Part numbers include ATP 102357, HL MANDO 30A5006 and PIONEER DA7042, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 2019 Kia Rio come from 6 brands — APEX, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is APEX AMS13140.

Listed part numbers: APEX AMS13140, FEL-PRO MS97228 and AJUSA 13275000, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts are listed for the 2019 Kia Rio, from ENGINETECH, HYUNDAI, MELLING and 1 other brand.

Listed part numbers: ENGINETECH V2200, HYUNDAI 222112B400 and MELLING V5564, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts are listed for the 2019 Kia Rio, from ANCHOR and PIONEER.

Listed part numbers: ANCHOR 10184 and PIONEER 610184.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2019 Kia Rio.

Listed part numbers: ANCHOR 300876 and ANCHOR 300875.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

103 Oil parts are listed for the 2019 Kia Rio, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. MOBIL 125195 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 61 parts.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2019 Kia Rio, from DORMAN, AGS, ELRING and 2 other brands. DORMAN 090033 carries the "Popular" badge.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2019 Kia Rio come from 4 brands — DORMAN, ELRING, FEL-PRO and 1 other brand. The "Popular" part is DORMAN 095147.

Listed part numbers: DORMAN 095147, DORMAN 995147CD and ELRING 726760, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2019 Kia Rio, from CALORSTAT, GATES, MOTORAD and 1 other brand.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO151 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts are listed for the 2019 Kia Rio, from BOSCH, VARIOUS MFR, WIX and 13 other brands. WIX 51334XP carries the "Popular" badge.

In the Economy grade, BOSCH, FRAM, FVP and 2 other brands supply 5 parts: the catalog's value-priced group. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51334XP.

The Standard Replacement section lists 13 options from ACDELCO, BOSCH, DENSO and 9 other brands — built to original-equipment specification. BOSCH 3312 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts for the 2019 Kia Rio come from 4 brands — AUTOTECNICA, DORMAN, SPECTRA PREMIUM and 1 other brand.

This group includes AUTOTECNICA HY1416216, DORMAN 264464 and SPECTRA PREMIUM HYP18A and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 Kia Rio — VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts are listed for the 2019 Kia Rio, from ULTRA-POWER, MELLING, ENGINETECH and 2 other brands. MELLING M526 carries the "Popular" badge.

Economy: 1 part, from ULTRA-POWER. A representative part number is ULTRA-POWER M526.

The Standard Replacement section: 4 options from MELLING, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. MELLING M526 is listed in this group.

Listed part numbers: MELLING M526 and ENGINETECH EP2215, plus the other parts above.

This table covers the pickup tubes and screens that feed the oil pump. Read more

This group shows a single part: MELLING 403S.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts for the 2019 Kia Rio come from 2 brands — ENGINETECH and TOPLINE.

In the Premium grade, ENGINETECH supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH P15124.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE PAHY22L.

Listed part numbers: ENGINETECH P15124, ENGINETECH K15124P and TOPLINE PAHY22L.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 2019 Kia Rio come from 4 brands — HASTINGS MANUFACTURING, ENGINETECH, TOPLINE and 1 other brand. The "Popular" part is HASTINGS MANUFACTURING 2C4504.

Premium: 1 part, from ENGINETECH. A representative part number is ENGINETECH M30314.

Standard Replacement: 3 parts, from HASTINGS MANUFACTURING and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C4504.

1 further part sits outside the graded sections, with the same engine-level match.

This group includes HASTINGS MANUFACTURING 2C4504, ENGINETECH M30314 and HASTINGS MANUFACTURING 2C4504S and the remaining parts above.

This table covers the Thrust washers. Read more

2 Thrust Washer parts are listed for the 2019 Kia Rio, from ENGINETECH and ITM ENGINE COMPONENTS.

This group includes ENGINETECH TW1017 and ITM ENGINE COMPONENTS 1T4312STD.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts for the 2019 Kia Rio come from 4 brands — CLOYES, HYUNDAI, MELLING and 1 other brand.

This group includes CLOYES C967, HYUNDAI 243212B620 and MELLING 967 and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

8 Timing Chain & Component Kit parts are listed for the 2019 Kia Rio, from CLOYES, MELLING, PREFERRED COMPONENTS INC and 3 other brands. CLOYES 90967SX carries the "Popular" badge.

Economy: 1 part, from PREFERRED COMPONENTS INC. A representative part number is PREFERRED COMPONENTS INC TS15124.

The Standard Replacement section: 7 options from CLOYES, MELLING, ACKOJA and 2 other brands. CLOYES 90967SX is listed in this group.

This group includes CLOYES 90967SX, PREFERRED COMPONENTS INC TS15124 and CLOYES 90967S and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

7 Timing Chain Guide / Damper parts for the 2019 Kia Rio come from 4 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand. The "Popular" part is CLOYES 96092.

This group includes CLOYES 96092, MELLING BT6092 and CLOYES 96093 and the remaining parts above.