2023 Kia Rio Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2023 Kia Rio — AJUSA 54244600.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Crankshaft Seal parts for the 2023 Kia Rio come from 2 brands — AJUSA and FEL-PRO.

This group includes AJUSA 15096500, AJUSA 15096400 and FEL-PRO BS40740.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2023 Kia Rio — AJUSA 81061400.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2023 Kia Rio — AJUSA 10197100.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2023 Kia Rio — AJUSA 52573500.

This table covers the Engine covers. Read more

One part is listed for the 2023 Kia Rio — TECHPRO KI1228194.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2023 Kia Rio — AJUSA 50525400.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2023 Kia Rio — HL MANDO 30A5025.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts are listed for the 2023 Kia Rio, from AJUSA and ELRING.

This group includes AJUSA 13275000 and ELRING B06380.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: ANCHOR 10381.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

40 Oil parts for the 2023 Kia Rio come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 33 parts.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2023 Kia Rio come from 3 brands — DORMAN, REIN and SKP.

This group includes DORMAN 090033, DORMAN 090053 and REIN HWU0110 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2023 Kia Rio, from DORMAN and AJUSA.

Listed part numbers: AJUSA 22007100, DORMAN 095147 and DORMAN 995147CD.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2023 Kia Rio come from 2 brands — MOTORAD and SKP.

Listed part numbers: MOTORAD MO81, MOTORAD MO151 and MOTORAD MO223, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

11 Oil Filter parts for the 2023 Kia Rio come from 9 brands — VARIOUS MFR, PRO-TEC, CHAMP / LUBER-FINER and 6 other brands. The "Popular" part is PRO-TEC PXL10473.

The Economy section lists 4 options from PRO-TEC, VARIOUS MFR, CHAMP / LUBER-FINER and 1 other brand — the catalog's value-priced group. PRO-TEC PXL10473 is listed in this group.

In the Standard Replacement grade, VARIOUS MFR, WIX, BECK/ARNLEY and 3 other brands supply 7 parts: built to original-equipment specification. A representative part number is WIX WL10473.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts are listed for the 2023 Kia Rio, from AUTOTECNICA and MOTORAD.

Part numbers include AUTOTECNICA HY1422872 and MOTORAD MO387.

This table covers the Oil Filter housings. Read more

One part is listed for the 2023 Kia Rio — SKP SK263002.

This table covers the oil pans that hold the engine's oil sump. Read more

One part is listed for the 2023 Kia Rio — SPECTRA PREMIUM HYP18A.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2023 Kia Rio — CLOYES C531.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2023 Kia Rio come from 2 brands — CLOYES and INA.

Part numbers include CLOYES 90531SX and INA ZC76305.

This table covers the guides and dampers that keep the timing chain on its path. Read more

CLOYES supplies both parts for the 2023 Kia Rio.

Listed part numbers: CLOYES 96183 and CLOYES 96184.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: CLOYES 95559.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts are listed for the 2023 Kia Rio, from ANCHOR and PIONEER.

This group includes ANCHOR 10187 and PIONEER 630003.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 56082200.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 2023 Kia Rio — MELLING VL1060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 2023 Kia Rio come from 2 brands — AJUSA and FEL-PRO.

This group includes AJUSA 57070400, AJUSA 12030100 and AJUSA 12033800 and the remaining parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

7 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2023 Kia Rio come from 5 brands — HYUNDAI, DORMAN, SKP and 2 other brands. The "Popular" part is DORMAN 918024.

The Economy section: 3 options from DORMAN, SKP and ROSTRA. DORMAN 918024 is listed in this group.

Standard Replacement: 4 parts, from HYUNDAI and STANDARD MOTOR PRODUCTS. A representative part number is HYUNDAI 2435508000.

Part numbers include DORMAN 918024, SKP SK918024 and ROSTRA 790055, among others listed above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: HYUNDAI 243502M010.