2020 Kia Rio Engine Parts

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2020 Kia Rio — CLOYES 96213.

This table covers the camshafts that open the valves. Read more

This group shows a single part: HYUNDAI 241002B660.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: HYUNDAI 235102B010.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 2020 Kia Rio come from 2 brands — MAHLE / CLEVITE and TOPLINE.

This group includes MAHLE / CLEVITE CB1992A4 and TOPLINE RBHY22T.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 2020 Kia Rio come from 3 brands — AJUSA, ELRING and TOPLINE.

This group includes AJUSA 54244600, ELRING 332450 and TOPLINE CBSHY26.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

TOPLINE supplies both parts for the 2020 Kia Rio.

Part numbers include TOPLINE MBHY26 and TOPLINE TWHY26.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts are listed for the 2020 Kia Rio, from AJUSA, ELRING and FEL-PRO. FEL-PRO BS40740 carries the "Popular" badge.

This group includes FEL-PRO BS40740, AJUSA 15096500 and AJUSA 15096400 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2020 Kia Rio come from 2 brands — AJUSA and TOPLINE.

This group includes AJUSA 81061400 and TOPLINE HBHY26.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts for the 2020 Kia Rio come from 4 brands — AJUSA, APEX, ELRING and 1 other brand.

This group includes AJUSA 10197100, APEX AHG1314 and ELRING 933930 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 2020 Kia Rio come from 3 brands — AJUSA, ELRING and TOPLINE.

Listed part numbers: AJUSA 52573500, ELRING 065780 and TOPLINE HSHY26M.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2020 Kia Rio.

Listed part numbers: KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO KI1228177.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2020 Kia Rio come from 3 brands — AJUSA, ELRING and TOPLINE.

This group includes AJUSA 50525400, ELRING 550130 and TOPLINE CGSHY26M.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 2020 Kia Rio, from HYUNDAI and TOPLINE.

Part numbers include HYUNDAI 222122B000 and TOPLINE EVHY26.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

This group shows a single part: WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 2020 Kia Rio come from 4 brands — ATP, HL MANDO, PIONEER and 1 other brand.

This group includes ATP 102357, HL MANDO 30A5006 and PIONEER DA7042 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2020 Kia Rio come from 4 brands — ELRING, FEL-PRO, AJUSA and 1 other brand. The "Popular" part is FEL-PRO MS97228.

This group includes FEL-PRO MS97228, AJUSA 13275000 and BECK/ARNLEY 0376208 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts are listed for the 2020 Kia Rio, from HYUNDAI, MELLING and TOPLINE.

Part numbers include HYUNDAI 222112B400, MELLING V5564 and TOPLINE IVHY26.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2020 Kia Rio — ANCHOR 10381.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

130 Oil parts are listed for the 2020 Kia Rio, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. MOBIL 125195 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 85 parts.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2020 Kia Rio, from DORMAN, AGS, ELRING and 2 other brands. DORMAN 090033 carries the "Popular" badge.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2020 Kia Rio come from 4 brands — DORMAN, ELRING, FEL-PRO and 1 other brand. The "Popular" part is DORMAN 095147.

Part numbers include DORMAN 095147, DORMAN 995147CD and ELRING 726760, among others listed above.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2020 Kia Rio, from MOTORAD and SKP.

This group includes MOTORAD MO151 and SKP SKMO151.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts are listed for the 2020 Kia Rio, from VARIOUS MFR, PRO-TEC, CHAMP / LUBER-FINER and 7 other brands. PRO-TEC PXL10473 carries the "Popular" badge.

In the Economy grade, PRO-TEC, VARIOUS MFR, CHAMP / LUBER-FINER and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is PRO-TEC PXL10473.

The Standard Replacement section lists 8 options from VARIOUS MFR, WIX, ACDELCO and 4 other brands — built to original-equipment specification. WIX WL10473 is listed in this group.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts for the 2020 Kia Rio come from 2 brands — AUTOTECNICA and MOTORAD.

This group includes AUTOTECNICA HY1422872 and MOTORAD MO387.

This table covers the Oil Filter housings. Read more

This group shows a single part: SKP SK263002.

This table covers the oil pans that hold the engine's oil sump. Read more

This group shows a single part: SPECTRA PREMIUM HYP18A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Kia Rio — VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts are listed for the 2020 Kia Rio, from ULTRA-POWER, MELLING and TOPLINE.

Economy: 1 part, from ULTRA-POWER. A representative part number is ULTRA-POWER M526.

The Standard Replacement section: 1 option from MELLING. MELLING M526 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: ULTRA-POWER M526 and TOPLINE OPHY26M, plus the other parts above.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: CLOYES C541.

This table covers the pickup tubes and screens that feed the oil pump. Read more

This group shows a single part: MELLING 403S.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: TOPLINE PAHY26M.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts for the 2020 Kia Rio come from 2 brands — HYUNDAI and TOPLINE.

Part numbers include HYUNDAI 230402B600 and TOPLINE RSHY26.

This table covers the Thrust washers. Read more

One part is listed for the 2020 Kia Rio — ITM ENGINE COMPONENTS 1T4312STD.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2020 Kia Rio — KIA 244102M012.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts for the 2020 Kia Rio come from 2 brands — CLOYES and HYUNDAI.

Part numbers include CLOYES C531, CLOYES C540 and HYUNDAI 243212M000.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts are listed for the 2020 Kia Rio, from CLOYES and INA.

Part numbers include CLOYES 90531SX, CLOYES 90540SX and INA ZC76305.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts for the 2020 Kia Rio come from CLOYES. The "Popular" part is CLOYES 96214.

Listed part numbers: CLOYES 96214, CLOYES 96216 and CLOYES 96183, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

CLOYES supplies both parts for the 2020 Kia Rio.

This group includes CLOYES 96212 and CLOYES 95559.

This table covers the Timing covers. Read more

This group shows a single part: AUTOTECNICA HY1423402.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Torque Strut Mount parts for the 2020 Kia Rio come from 3 brands — ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER.

Listed part numbers: ANCHOR 10187, DEA / MARMON RIDE CONTROL A71104 and PIONEER 630003.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts are listed for the 2020 Kia Rio, from AJUSA, BECK/ARNLEY, ELRING and 1 other brand.

Part numbers include AJUSA 56082200, BECK/ARNLEY 0362010 and ELRING 547460, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

TOPLINE supplies both parts for the 2020 Kia Rio.

This group includes TOPLINE EVGHY26 and TOPLINE IVGHY26.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2020 Kia Rio — TOPLINE LIFHY23.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts for the 2020 Kia Rio come from 2 brands — HYUNDAI and MELLING.

Listed part numbers: HYUNDAI 222212B001 and MELLING VS2280.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

4 Valve Spring Retainer Keeper parts for the 2020 Kia Rio come from 4 brands — HYUNDAI, MELLING, QUALCAST and 1 other brand.

This group includes HYUNDAI 2222302500, MELLING VL1060 and QUALCAST 345008 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Valve Stem Seal parts are listed for the 2020 Kia Rio, from ELRING, APEX, FEL-PRO and 3 other brands. APEX AVS13014 carries the "Popular" badge.

Part numbers include APEX AVS13014, FEL-PRO SS72939 and AJUSA 57070400, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

11 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2020 Kia Rio, from HYUNDAI, STANDARD MOTOR PRODUCTS, DORMAN and 5 other brands. DORMAN 918024 carries the "Popular" badge.

Economy: 5 parts, from DORMAN, SKP, HOLSTEIN and 2 other brands. A representative part number is DORMAN 918024.

The Standard Replacement section: 6 options from HYUNDAI, STANDARD MOTOR PRODUCTS and CLOYES. HYUNDAI 2435507000 is listed in this group.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

3 Variable Valve Timing (VVT) Sprocket parts are listed for the 2020 Kia Rio, from AUTOTECNICA and HYUNDAI.

Economy: 2 parts, from AUTOTECNICA. A representative part number is AUTOTECNICA HY1421814.

The Standard Replacement section: 1 option from HYUNDAI. HYUNDAI 243502M010 is listed in this group.

Part numbers include AUTOTECNICA HY1421814, AUTOTECNICA HY1421813 and HYUNDAI 243502M010.