2008 Dodge Caliber Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

17 Coolant / Antifreeze parts are listed for the 2008 Dodge Caliber, from PRESTONE, VALVOLINE, PEAK and 2 other brands. FVP MV5050GAL carries the "Popular" badge. All of them fit every engine offered in the 2008 Caliber.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PEAK and PRESTONE supply 3 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Heavy Duty section lists 1 option from VALVOLINE — rated for severe service. VALVOLINE ZXG051 is listed in this group.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 7 options from VALVOLINE, PRESTONE, ACDELCO and 1 other brand — built to original-equipment specification. ACDELCO 105027 is listed in this group.

This table covers the Coolant filler necks. Read more

3 Coolant Filler Neck parts for the 2008 Dodge Caliber come from 3 brands — ACDELCO, FOUR SEASONS and GATES. Every part fits both the 1.8L L4 and the 2.4L L4.

Listed part numbers: ACDELCO 32948K1 and FOUR SEASONS 85324, plus the other parts above.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Coolant Hose / Pipe Seal parts for the 2008 Dodge Caliber come from 4 brands — AJUSA, FEL-PRO, ULTRA-POWER and 1 other brand. Every part fits both the 1.8L L4 and the 2.4L L4.

This group includes AJUSA 16060600 and FEL-PRO ES72872 and the remaining parts above.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

5 Coolant Reservoir parts for the 2008 Dodge Caliber come from 5 brands — DORMAN, GPD, MOPAR and 2 other brands. The "Popular" part is DORMAN 603631. Every part fits both the 1.8L L4 and the 2.4L L4.

Part numbers include DORMAN 603631, GPD 2411134 and MOPAR 5058156AE, among others listed above.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

4 Coolant Reservoir Cap parts for the 2008 Dodge Caliber come from 3 brands — DORMAN, MOPAR and MOTORAD. Every part fits both the 1.8L L4 and the 2.4L L4.

Part numbers include DORMAN 54201, DORMAN 54203 and MOPAR 55111074AB, among others listed above.

This table covers the Cooling Fan control modules. Read more

3 Cooling Fan Control Module parts for the 2008 Dodge Caliber come from US MOTOR WORKS. Every part fits both the 1.8L L4 and the 2.4L L4.

This group includes US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts are listed for the 2008 Dodge Caliber, from ACDELCO, GATES and MOTORAD. All of them fit every engine offered in the 2008 Caliber.

This group includes ACDELCO 12A01, GATES 31413 and MOTORAD 3003.

This table covers the Hose clamps. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 6508369AA.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

13 Radiator parts are listed for the 2008 Dodge Caliber, from FAMOUS BRAND, GPD, CSF and 10 other brands. CSF 3415 carries the "Popular" badge. All of them fit every engine offered in the 2008 Caliber.

Economy: 2 parts, from FAMOUS BRAND and GPD. A representative part number is FAMOUS BRAND 438144.

The Standard Replacement section: 11 options from CSF, SPECTRA PREMIUM, TYC and 8 other brands. CSF 3415 is listed in this group.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

7 Radiator Cap parts are listed for the 2008 Dodge Caliber, from GATES, MOTORAD, CALORSTAT and 1 other brand. GATES 31528 carries the "Popular" badge. All of them fit every engine offered in the 2008 Caliber.

The Locking Replacement section lists 2 options from GATES and MOTORAD — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. GATES 31518 is listed in this group.

The Standard Replacement section: 5 options from CALORSTAT, GATES, MOTORAD and 1 other brand. GATES 31528 is listed in this group.

Listed part numbers: GATES 31528, GATES 31518 and MOTORAD ST16, plus the other parts above.

This table covers the petcocks used to drain the radiator. Read more

2 Radiator Drain Petcock parts for the 2008 Dodge Caliber come from 2 brands — DORMAN and MOPAR. Every part fits both the 1.8L L4 and the 2.4L L4.

This group includes DORMAN 61134 and MOPAR 52028466AB.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

6 Radiator Fan Assembly parts for the 2008 Dodge Caliber come from 6 brands — DORMAN, GPD, FOUR SEASONS and 3 other brands. The "Popular" part is DORMAN 621029. Every part fits both the 1.8L L4 and the 2.4L L4.

The Economy section: 2 options from DORMAN and GPD. DORMAN 621029 is listed in this group.

Standard Replacement: 4 parts, from FOUR SEASONS, TYC, UAC and 1 other brand. A representative part number is FOUR SEASONS 76103.

This group includes DORMAN 621029, GPD 2811608 and FOUR SEASONS 76103 and the remaining parts above.

This table covers the Radiator Fan blades. Typical signs include chatter, streaks, or a skip at the top of the stroke. Confirm left and right lengths in the notes — they are often different. Read more

This group shows a single part: MOPAR 68031871AA.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

One part is listed for the 2008 Dodge Caliber — VEMO V33010024.

This table covers the shrouds that duct air through the fan and radiator. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 68031872AA.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

22 Radiator Hose parts for the 2008 Dodge Caliber come from 5 brands — DAYCO, CONTINENTAL, GATES and 2 other brands. The "Popular" part is ACDELCO 26562X. 21 parts fit every engine; the other 1 is engine-specific.

This table covers the harness connectors at the Radiator Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Dodge Caliber — CONTINENTAL 65652.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: MOPAR 68020480AA.

This table covers the seals at the Radiator. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Radiator Seal parts for the 2008 Dodge Caliber come from MOPAR. Every part fits both the 1.8L L4 and the 2.4L L4.

Part numbers include MOPAR 5191255AA, MOPAR 5191256AA and MOPAR 5191257AA.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

16 Temperature Sender / Sensor parts are listed for the 2008 Dodge Caliber, from HOLSTEIN, WALKER PRODUCTS, NTK and 8 other brands. DELPHI TS10546 carries the "Popular" badge. All of them fit every engine offered in the 2008 Caliber.

Economy: 5 parts, from HOLSTEIN, GPD, UNITED MOTOR PRODUCTS and 1 other brand. A representative part number is GPD 1712518.

In the Full Service Kit grade, WALKER PRODUCTS supplies 1 part: grouped under the catalog's "Full Service Kit" designation — the notes column spells out what sets them apart. A representative part number is WALKER PRODUCTS 21191074.

The Standard Replacement section: 10 options from NTK, STANDARD MOTOR PRODUCTS, WELLS and 4 other brands. DELPHI TS10546 is listed in this group.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

19 Thermostat parts for the 2008 Dodge Caliber come from 8 brands — MOTORAD, CALORSTAT, GATES and 5 other brands. The "Popular" part is CALORSTAT TH731077J. 18 parts fit every engine; the other 1 is engine-specific.

The Economy section: 6 options from DORMAN, ULTRA-POWER, AUTOTECNICA and 1 other brand. AUTOTECNICA CY0714523 is listed in this group.

Heavy Duty: 2 parts, from MOTORAD. A representative part number is MOTORAD 5657203.

Standard Replacement: 11 parts, from MOTORAD, CALORSTAT, GATES and 1 other brand. A representative part number is CALORSTAT TH731077J.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Thermostat / Thermostat Housing / Water Outlet Seal parts are listed for the 2008 Dodge Caliber, from FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. FEL-PRO 35826 carries the "Popular" badge. All of them fit every engine offered in the 2008 Caliber.

Listed part numbers: FEL-PRO 35826, FEL-PRO 35837 and APEX AWO2245, plus the other parts above.

This table covers the housings and outlets the thermostat sits in. Read more

8 Thermostat Housing / Water Outlet parts for the 2008 Dodge Caliber come from 5 brands — DORMAN, ULTRA-POWER, MOTORAD and 2 other brands. The "Popular" part is DORMAN 902316. 7 parts fit every engine; the other 1 is engine-specific.

The Economy section: 5 options from DORMAN, ULTRA-POWER and SKP. DORMAN 902316 is listed in this group.

Standard Replacement: 3 parts, from MOTORAD and FOUR SEASONS. A representative part number is FOUR SEASONS 85342.

This group includes DORMAN 902316, ULTRA-POWER 902319 and DORMAN 902316XD and the remaining parts above.

This table covers the gaskets that seal the Water Inlet. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Water Inlet Gasket parts are listed for the 2008 Dodge Caliber, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO ES72872 carries the "Popular" badge. All of them fit every engine offered in the 2008 Caliber.

This group includes FEL-PRO ES72872, AJUSA 01113800 and APEX AWP3203 and the remaining parts above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

21 Water Pump parts for the 2008 Dodge Caliber come from 17 brands — GATES, DAYCO, GMB and 14 other brands. The "Popular" part is SKP SK1207180. 18 parts fit every engine; the other 3 are engine-specific.

The Economy section: 9 options from SKP, WJB / INMOTION PARTS, BECK/ARNLEY and 6 other brands. SKP SK1207180 is listed in this group.

Standard Replacement: 12 parts, from GATES, DAYCO, GMB and 5 other brands. A representative part number is ACDELCO 252919.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Water Pump Gasket parts are listed for the 2008 Dodge Caliber, from FEL-PRO, MAHLE / CLEVITE, APEX and 2 other brands. FEL-PRO 35813 carries the "Popular" badge. All of them fit every engine offered in the 2008 Caliber.

This group includes FEL-PRO 35813, MAHLE / CLEVITE K32192 and APEX AWP3295 and the remaining parts above.

This table covers the Water Pump pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 68046027AA.

This table covers the Water Pump Seal O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: ULTRA-POWER ES72872.