2008 Dodge Caliber Interior Parts

This table covers the accelerator pedals. Read more

This group shows a single part: MOPAR 4891585AC.

This table covers the Accelerator Pedal position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

5 Accelerator Pedal Position Sensor parts are listed for the 2008 Dodge Caliber, from DORMAN, HOLSTEIN, NTK and 2 other brands. DORMAN 699120 carries the "Popular" badge.

Part numbers include DORMAN 699120, HOLSTEIN 2PPS0002 and NTK AD0486, among others listed above.

This table covers the Accessory Power Outlet covers. Read more

This group shows a single part: MOPAR 4685591AD.

This table covers the clocksprings that carry airbag and steering-wheel circuits through the column. Read more

10 Air Bag Clockspring parts for the 2008 Dodge Caliber come from 6 brands — DORMAN, SHEE-MAR, MOPAR and 3 other brands. The "Popular" part is SKP SK525129.

The Economy section lists 5 options from DORMAN, SHEE-MAR and SKP — the catalog's value-priced group. SKP SK525129 is listed in this group.

In the Standard Replacement grade, MOPAR and STANDARD MOTOR PRODUCTS supply 4 parts: built to original-equipment specification. A representative part number is MOPAR 5156106AE.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the Brake Pedal pads. Typical signs include squeal, grind, or a wear-indicator scrape. Replace pads as an axle set and inspect the rotor or drum they ride on. Read more

MOPAR supplies both parts for the 2008 Dodge Caliber.

Part numbers include MOPAR 5170975AB and MOPAR 68069625AA.

This table covers the Center consoles. Read more

MOPAR supplies the 3 Center Console parts for the 2008 Dodge Caliber.

Listed part numbers: MOPAR 1EE211DAAB, MOPAR 1EE211DVAB and MOPAR 1EE211KAAB.

This table covers the cigarette-lighter elements. Read more

This group shows a single part: MOPAR 4685536.

This table covers the sockets a cigarette lighter or 12-volt plug fits. Read more

This group shows a single part: MOPAR 4685590.

This table covers the clutch pedals. Read more

This group shows a single part: MOPAR 5273419AK.

This table covers the dash vents that direct cabin airflow. Read more

5 Dash Board Air Vent parts for the 2008 Dodge Caliber come from MOPAR.

Listed part numbers: MOPAR 1AV561DVAC, MOPAR 1AV561KAAC and MOPAR 1AV571DVAC, plus the other parts above.

This table covers the dash covers that sit over the instrument panel. Read more

6 Dash Board Cover parts for the 2008 Dodge Caliber come from DASH DESIGNS. The "Popular" part is DASH DESIGNS 14270C.

In the Carpet grade, DASH DESIGNS supplies 1 part: grouped under the catalog's "Carpet" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 14270C.

The Suede section lists 2 options from DASH DESIGNS — grouped under the catalog's "Suede" designation — the notes column spells out what sets them apart. DASH DESIGNS 14270B is listed in this group.

In the Velour grade, DASH DESIGNS supplies 1 part: grouped under the catalog's "Velour" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 14270V.

In the Woven grade, DASH DESIGNS supplies 2 parts: grouped under the catalog's "Woven" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 14270A.

Listed part numbers: DASH DESIGNS 14270C, DASH DESIGNS 14270B and DASH DESIGNS 14270D, plus the other parts above.

This table covers the Dome Lamp assemblies. Read more

3 Dome Lamp Assembly parts for the 2008 Dodge Caliber come from MOPAR.

This group includes MOPAR 6TQ18DX9AA, MOPAR 6TQ18HDAAA and MOPAR 5JG55DW1AD.

This table covers the floor mats cut for this cabin. Read more

DASH DESIGNS supplies the 4 Floor Mat parts for the 2008 Dodge Caliber.

The All Weather section lists 2 options from DASH DESIGNS — grouped under the catalog's "All Weather" designation — the notes column spells out what sets them apart. DASH DESIGNS A212003CL is listed in this group.

The Carpet section: 2 options from DASH DESIGNS. DASH DESIGNS A21200E is listed in this group.

Part numbers include DASH DESIGNS A212003CL, DASH DESIGNS B212003CL and DASH DESIGNS A21200E, among others listed above.

This table covers the Gauge panels. Read more

2 Gauge Panel parts for the 2008 Dodge Caliber come from AUTOMETER.

Part numbers include AUTOMETER 12239 and AUTOMETER 12238.

This table covers the Grab Bar handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR QY67DW1AD.

This table covers the guides the headrest posts slide in. Read more

MOPAR supplies both parts for the 2008 Dodge Caliber.

Part numbers include MOPAR 1DS911D1AA and MOPAR 1DS941D1AA.

This table covers the Hood Release cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

One part is listed for the 2008 Dodge Caliber — DORMAN 912437.

This table covers the information-display screens in the instrument panel. Read more

One part is listed for the 2008 Dodge Caliber — DORMAN 588004.

This table covers the interior door handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes. Read more

6 Inside Door Handle parts are listed for the 2008 Dodge Caliber, from TECHPRO and DORMAN. DORMAN 81594 carries the "Popular" badge.

This group includes DORMAN 81594, DORMAN 81593 and TECHPRO CH1352118 and the remaining parts above.

This table covers the interior rear-view mirrors. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 68292918AA.

This table covers the Instrument bezels. Read more

3 Instrument Bezel parts for the 2008 Dodge Caliber come from MOPAR.

Listed part numbers: MOPAR 5183758AF, MOPAR 5183759AH and MOPAR YD501Z2AE.

This table covers the Instrument Panel reinforcements. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 5074713AA.

This table covers the information and warning labels applied to the vehicle. Read more

MOPAR supplies the 5 Label parts for the 2008 Dodge Caliber.

This group includes MOPAR 5058154AC, MOPAR 5058594AA and MOPAR 5058873AA and the remaining parts above.

This table covers the microphones for the hands-free or voice system. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 68002646AB.

This table covers the Power Seat Memory position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

2 Power Seat Memory Position Sensor parts are listed for the 2008 Dodge Caliber, from MOPAR and WELLS.

Part numbers include MOPAR 5084008AA and WELLS 5S9402.

This table covers the Quarter panels. Read more

MOPAR supplies the 5 Quarter Panel parts for the 2008 Dodge Caliber.

Listed part numbers: MOPAR 1AX92BDAAJ, MOPAR 1AX92DKAAJ and MOPAR 1CM03DW1AG, plus the other parts above.

This table covers the radios and head units. Read more

This group shows a single part: MOPAR 5064171AN.

This table covers the Radio Installation kits. Read more

2 Radio Installation Kit parts for the 2008 Dodge Caliber come from METRA.

Listed part numbers: METRA 996507 and METRA 956534B.

This table covers the interfaces that connect an aftermarket radio to the factory harness. Read more

METRA supplies the 7 Radio Module Interface parts for the 2008 Dodge Caliber. METRA AXDICH13 carries the "Popular" badge.

Listed part numbers: METRA AXDICH13, METRA AXTCCH13 and METRA AXADBX2, plus the other parts above.

This table covers the Seat Adjustment cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

This group shows a single part: MOPAR 4610176AA.

This table covers the Seat Adjustment handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes. Read more

MOPAR supplies the 3 Seat Adjustment Handle parts for the 2008 Dodge Caliber.

This group includes MOPAR 1DQ58BD5AA, MOPAR 1DQ641KAAA and MOPAR 1DQ64XDVAA.

This table covers the aftermarket and replacement seat covers listed for this cabin. Typical signs include split seams, collapsed foam showing through, or a cover that has shrunk off the bolster. Confirm row and material in the notes; many covers are side- and trim-specific. Read more

TAILORED TRUCK supplies the 5 Seat Cover parts for the 2008 Dodge Caliber.

Listed part numbers: TAILORED TRUCK 12375, TAILORED TRUCK 12376 and TAILORED TRUCK 17383, plus the other parts above.

This table covers the foam pads inside a seat cushion. Read more

4 Seat Cushion Foam parts for the 2008 Dodge Caliber come from MOPAR.

This group includes MOPAR 68093137AA, MOPAR 68093139AA and MOPAR 68093140AA and the remaining parts above.

This table covers the speakers in this cabin position. Read more

4 Speaker parts for the 2008 Dodge Caliber come from 2 brands — MOPAR and METRA.

This group includes METRA AW669SP, MOPAR 5059068AB and MOPAR 5091019AB and the remaining parts above.

This table covers the Speaker bezels. Read more

This group shows a single part: METRA 826601.

This table covers the Speaker panels. Read more

This group shows a single part: MOPAR 1DR91XDVAB.

This table covers the Steering Column covers. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 1CH70XDVAB.

This table covers the Sunroof motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

2 Sunroof Motor parts for the 2008 Dodge Caliber come from 2 brands — MOPAR and STANDARD MOTOR PRODUCTS.

Part numbers include MOPAR 5183174AA and STANDARD MOTOR PRODUCTS PSM147.

This table covers the adjusters that set steering-column tilt. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 5057170AE.

This table covers the indicators that show the selected gear. Read more

2 Transmission Shift Indicator parts for the 2008 Dodge Caliber come from MOPAR.

Part numbers include MOPAR 5038026AC and MOPAR 5062135AC.

This table covers the knobs on the shift lever. Read more

MOPAR supplies both parts for the 2008 Dodge Caliber.

Part numbers include MOPAR 5273370AD and MOPAR 5273342AB.

This table covers the Trim screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 6105043AA.

This table covers the Window Crank handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes. Read more

2 Window Crank Handle parts for the 2008 Dodge Caliber come from DORMAN.

This group includes DORMAN 76932 and DORMAN 93160.

This table covers the motors that drive a window regulator. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

18 Window Motor parts for the 2008 Dodge Caliber come from 4 brands — CARDONE, WAI GLOBAL, DORMAN and 1 other brand. The "Popular" part is DORMAN 742172.

The Economy section: 9 options from DORMAN, CARDONE and WAI GLOBAL. DORMAN 742172 is listed in this group.

Standard Replacement: 9 parts, from CARDONE, WAI GLOBAL and MOPAR. A representative part number is CARDONE 8240002.

This table covers the regulators that raise and lower each door glass. Read more

8 Window Regulator parts for the 2008 Dodge Caliber come from 3 brands — WAI GLOBAL, DORMAN and AISIN. The "Popular" part is DORMAN 749541.

The Economy section: 2 options from DORMAN. DORMAN 749541 is listed in this group.

Standard Replacement: 6 parts, from WAI GLOBAL and AISIN. A representative part number is AISIN RPCH026.

This group includes DORMAN 749541, DORMAN 749540 and AISIN RPCH026 and the remaining parts above.

This table covers combined regulator-and-motor assemblies for a door. Read more

16 Window Regulator & Motor Assembly parts are listed for the 2008 Dodge Caliber, from DORMAN, AISIN, WAI GLOBAL and 3 other brands. DORMAN 748541 carries the "Popular" badge.

Economy: 5 parts, from DORMAN and ULTRA-POWER. A representative part number is DORMAN 748541.

The Standard Replacement section: 11 options from AISIN, WAI GLOBAL, VDO / CONTINENTAL and 1 other brand. AISIN RPACH107 is listed in this group.