2008 Dodge Caliber Electrical Parts

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator. Read more

18 Alternator / Generator parts are listed for the 2008 Dodge Caliber, from PURE ENERGY, REMY, TYC and 7 other brands. PURE ENERGY 15728N carries the "Popular" badge. 16 parts fit every engine; the other 2 are engine-specific.

In the New grade, TYC, PURE ENERGY, REMY and 4 other brands supply 8 parts: brand-new units rather than rebuilt ones. A representative part number is PURE ENERGY 15728N.

In the Remanufactured grade, DENSO, ACDELCO, BOSCH and 6 other brands supply 10 parts: factory-rebuilt units with new wear components. A representative part number is ACDELCO 3342738.

This table covers the pulleys on the alternator shaft. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

3 Alternator / Generator Pulley parts for the 2008 Dodge Caliber come from 3 brands — AUTOTECNICA, CONTINENTAL and LITENS. Every part fits both the 1.8L L4 and the 2.4L L4.

Part numbers include AUTOTECNICA CY1416794, CONTINENTAL 49915 and LITENS 920810A.

This table covers the Alternator / Generator stators. Read more

This group shows a single part: BOSCH 1986AE0679.

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery. Read more

2 Battery parts for the 2008 Dodge Caliber come from 2 brands — BOSCH and FULLRIVER. Every part fits both the 1.8L L4 and the 2.4L L4.

In the AGM (Extended Life) grade, BOSCH supplies 1 part: grouped under the catalog's "AGM (Extended Life)" designation — the notes column spells out what sets them apart. A representative part number is BOSCH S675DT.

In the Performance AGM (Extended Life + Increased Power) grade, FULLRIVER supplies 1 part: grouped under the catalog's "Performance AGM (Extended Life + Increased Power)" designation — the notes column spells out what sets them apart. A representative part number is FULLRIVER FT82534.

This group includes BOSCH S675DT and FULLRIVER FT82534.

This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

MOPAR supplies both parts for the 2008 Dodge Caliber. All of them fit every engine offered in the 2008 Caliber.

Listed part numbers: MOPAR 4671169AC and MOPAR 4672303AB.

This table covers the Battery covers. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 5082107AB.

This table covers the terminals and clamps that connect cables to the battery posts. Read more

2 Battery Terminal parts for the 2008 Dodge Caliber come from DEKA. Every part fits both the 1.8L L4 and the 2.4L L4.

Listed part numbers: DEKA 00350 and DEKA 01056.

This table covers the trays the battery sits in. Read more

This group shows a single part: TECHPRO CH2995103.

This table covers the replacement fuses for this vehicle's fuse boxes. Typical signs include one circuit dead while its neighbor still works, or a fuse that blows again as soon as you replace it. Match amperage and fuse type. A repeat blow means a short — find it before the next fuse. Read more

25 Fuse parts for the 2008 Dodge Caliber come from 3 brands — BUSSMANN, LITTELFUSE and MOPAR. The "Popular" part is BUSSMANN ATM10. Every part fits both the 1.8L L4 and the 2.4L L4.

In the 10 Amp grade, BUSSMANN, LITTELFUSE and MOPAR supply 4 parts: grouped under the catalog's "10 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM10.

The 15 Amp section lists 4 options from BUSSMANN, LITTELFUSE and MOPAR — grouped under the catalog's "15 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM15 is listed in this group.

The 20 Amp section lists 4 options from BUSSMANN, LITTELFUSE and MOPAR — grouped under the catalog's "20 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM20 is listed in this group.

In the 25 Amp grade, BUSSMANN, LITTELFUSE and MOPAR supply 4 parts: grouped under the catalog's "25 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM25.

In the 30 Amp grade, BUSSMANN and LITTELFUSE supply 6 parts: grouped under the catalog's "30 Amp" designation — the notes column spells out what sets them apart. A representative part number is LITTELFUSE JCAS30.

The 40 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "40 Amp" designation — the notes column spells out what sets them apart. BUSSMANN FMX40 is listed in this group.

This table covers the Garage Door Opener modules. Typical signs include a cluster of unrelated faults, a no-communication code, or a module that will not sleep. Confirm power, ground and programming compatibility in the notes. Modules are rarely plug-and-play across years. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 56044968AB.

This table covers the horns mounted in the front of the vehicle. Read more

14 Horn parts for the 2008 Dodge Caliber come from 2 brands — FIAMM and MOPAR. The "Popular" part is FIAMM 7210223. Every part fits both the 1.8L L4 and the 2.4L L4.

The Accessory Replacement section lists 7 options from FIAMM — grouped under the catalog's "Accessory Replacement" designation — the notes column spells out what sets them apart. FIAMM 7210223 is listed in this group.

In the Standard Replacement grade, FIAMM and MOPAR supply 7 parts: built to original-equipment specification. A representative part number is FIAMM 7201223.

This table covers the key fobs that lock, unlock and start the vehicle. Read more

DORMAN supplies both parts for the 2008 Dodge Caliber. All of them fit every engine offered in the 2008 Caliber.

Part numbers include DORMAN 99174 and DORMAN 99174ST.

This table covers the replacement shells for the key fob. Read more

One part is listed for the 2008 Dodge Caliber — DORMAN 95343.

This table covers the Park Assist (PAS) Camera modules. Typical signs include a cluster of unrelated faults, a no-communication code, or a module that will not sleep. Confirm power, ground and programming compatibility in the notes. Modules are rarely plug-and-play across years. Read more

This group shows a single part: MOPAR 5137541AA.

This table covers the Power inverters. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 4671955AC.

This table covers the totally-integrated power modules that distribute body electrical power. Typical signs include a cluster of unrelated faults, a no-communication code, or a module that will not sleep. Confirm power, ground and programming compatibility in the notes. Modules are rarely plug-and-play across years. Read more

6 Power Supply Module (TIPM) parts for the 2008 Dodge Caliber come from 3 brands — DORMAN, MOPAR and CARDONE. Every part fits both the 1.8L L4 and the 2.4L L4.

Listed part numbers: CARDONE 731543, DORMAN 598730 and DORMAN 599906, plus the other parts above.

This table covers the powertrain-control modules that run engine and transmission. Read more

This group shows a single part: MOPAR 5150523AA.

This table covers the speed sensors on the transmission, transfer case or ABS ring. Typical signs include a dead speedometer, harsh transmission shifts, or a code for vehicle speed. Inspect the tone wheel and the connector before replacing the sensor. Read more

18 Speed Sensor parts for the 2008 Dodge Caliber come from 9 brands — STANDARD MOTOR PRODUCTS, SKP, BECK/ARNLEY and 6 other brands. The "Popular" part is SKP SKSC489. 14 parts fit every engine; the other 4 are engine-specific.

The Economy section lists 8 options from SKP, BECK/ARNLEY, HOLSTEIN and 2 other brands — the catalog's value-priced group. SKP SKSC489 is listed in this group.

Standard Replacement: 10 parts, from ROSTRA, WALKER PRODUCTS, NTK and 2 other brands. A representative part number is ROSTRA 501183.

This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

16 Starter Motor parts are listed for the 2008 Dodge Caliber, from PURE ENERGY, REMY, BOSCH and 7 other brands. PURE ENERGY 19442N carries the "Popular" badge. All of them fit every engine offered in the 2008 Caliber.

New: 7 parts, from PURE ENERGY, REMY, TYC and 4 other brands. A representative part number is PURE ENERGY 19442N.

Remanufactured: 9 parts, from PURE ENERGY, ACDELCO, BOSCH and 6 other brands. A representative part number is PURE ENERGY 19442.

This table covers the Yaw sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: MOPAR 68044219AA.