2008 Dodge Caliber Suspension Parts

This table covers the cam bolts and plates used to set camber at the knuckle. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

20 Alignment Bolt / Camber Plate parts are listed for the 2008 Dodge Caliber, from MEVOTECH, DORMAN, DELPHI and 7 other brands. DELPHI TAL10015 carries the "Popular" badge.

The Daily Driver section lists 8 options from DELPHI, MOOG, ACDELCO and 1 other brand — grouped for everyday commuting duty. DELPHI TAL10015 is listed in this group.

In the Economy grade, DORMAN, SKP, FVP and 4 other brands supply 12 parts: the catalog's value-priced group. A representative part number is DORMAN 13815.

This table covers the ball joints that articulate each control arm at the knuckle. Read more

15 Ball Joint parts are listed for the 2008 Dodge Caliber, from MEVOTECH, DELPHI, ACDELCO and 9 other brands. QUICK STEER K500063 carries the "Popular" badge.

The Daily Driver section: 8 options from DELPHI, ACDELCO, DORMAN and 4 other brands. ACDELCO 45D2401 is listed in this group.

Economy: 6 parts, from QUICK STEER, SKP, ULTRA-POWER and 3 other brands. A representative part number is QUICK STEER K500063.

The Premium section lists 1 option from MEVOTECH — a step above OE specification in materials, tolerances or warranty terms. MEVOTECH TXMS25511 is listed in this group.

This table covers the bump stops that limit suspension travel. Read more

2 Bump Stop parts for the 2008 Dodge Caliber come from MOPAR.

Listed part numbers: MOPAR 5272705AC and MOPAR 5171137AB.

This table covers the coil springs that carry vehicle weight at each corner. Typical signs include a sagging corner, a clunk through the spring, or a broken coil that you can see from the wheel well. Replace springs in axle pairs and inspect the seats and isolators while the spring is out. Read more

6 Coil Spring parts for the 2008 Dodge Caliber come from 4 brands — HUSKY SPRING, MEVOTECH, MOOG and 1 other brand. The "Popular" part is MOOG 81494.

This group includes MOOG 81494, HUSKY SPRING SC20909 and HUSKY SPRING SC20926 and the remaining parts above.

This table covers the rubber and polyurethane isolators that seat coil springs. Typical signs include a squeak from the spring pocket, or a spring that has walked off its seat. Replace the isolator whenever the spring is out — a crushed seat will noise a brand-new spring. Read more

14 Coil Spring Seat / Insulator parts are listed for the 2008 Dodge Caliber, from WESTAR, MEVOTECH, DEA / MARMON RIDE CONTROL and 5 other brands. MEVOTECH MK160321 carries the "Popular" badge.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

73 Control Arm parts are listed for the 2008 Dodge Caliber, from MEVOTECH, MOOG, DELPHI and 9 other brands. TRW JTC2140 carries the "Popular" badge. Grades run from Daily Driver through Premium; Daily Driver is the most populated section, led by DELPHI, DORMAN, MOOG and 6 other brands.

This table covers the bolts that anchor a control arm to the chassis or subframe. Read more

3 Control Arm Anchor Bolt parts are listed for the 2008 Dodge Caliber, from DORMAN and SKP.

Part numbers include DORMAN 14886, DORMAN 14885 and SKP SKY01358.

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

38 Control Arm Bushing parts are listed for the 2008 Dodge Caliber, from MEVOTECH, MOOG, ACDELCO and 7 other brands. MEVOTECH MS25416 carries the "Popular" badge. Grades run from Daily Driver through Economy; Daily Driver is the most populated section, led by MOOG, ACDELCO, MEVOTECH and 3 other brands.

This table covers the Front End kits. Read more

3 Front End Kit parts for the 2008 Dodge Caliber come from 3 brands — MOOG, ULTRA-POWER and DORMAN.

Daily Driver: 1 part, from MOOG. A representative part number is MOOG KIT263.

The Economy section: 1 option from ULTRA-POWER. ULTRA-POWER KIT263 is listed in this group.

Premium: 1 part, from DORMAN. A representative part number is DORMAN 541107.

Part numbers include MOOG KIT263 and DORMAN 541107, among others listed above.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

19 Shock / Strut parts are listed for the 2008 Dodge Caliber, from MONROE, KYB, PRT and 4 other brands. PRT 474941 carries the "Popular" badge.

Economy: 5 parts, from PRT, MONROE and SENSEN. A representative part number is PRT 474941.

In the Original Ride Quality grade, KYB, FCS, MONROE and 2 other brands supply 14 parts: grouped under the catalog's "Original Ride Quality" designation — the notes column spells out what sets them apart. A representative part number is FCS 345484.

This table covers complete strut assemblies with the spring already installed. Read more

13 Shock / Strut & Coil Spring Assembly parts are listed for the 2008 Dodge Caliber, from KYB, GABRIEL, PRT and 6 other brands. PRT 710103 carries the "Popular" badge.

Economy: 2 parts, from PRT and SENSEN. A representative part number is PRT 710103.

Original Ride Quality: 11 parts, from KYB, GABRIEL, FCS and 4 other brands. A representative part number is FCS 1345484.

This table covers the Shock / Strut bellows. Read more

7 Shock / Strut Bellow parts for the 2008 Dodge Caliber come from 7 brands — MONROE, MOOG, SKP and 4 other brands. The "Popular" part is MONROE 63631.

Daily Driver: 1 part, from MONROE. A representative part number is MONROE 63631.

The Economy section: 1 option from MOOG. MOOG K90460 is listed in this group.

5 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include MONROE 63631, MOOG K90460 and SKP SK90462, among others listed above.