2000 Honda CR-V Engine Parts

This table covers the Camshaft caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

One part is listed for the 2000 Honda CR-V — AJUSA 00794900.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Camshaft Seal parts for the 2000 Honda CR-V come from 16 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 13 other brands. The "Popular" part is APEX ATC1120.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts for the 2000 Honda CR-V come from 2 brands — APEX and VICTOR REINZ.

Part numbers include APEX ACP101 and VICTOR REINZ 711552200.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2000 Honda CR-V — TOPLINE CRH18L.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Connecting Rod Bearing parts are listed for the 2000 Honda CR-V, from MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 3 other brands. MAHLE / CLEVITE CB1461HN carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 5 parts: engineered beyond original-equipment specification. A representative part number is MAHLE / CLEVITE CB1461HN.

The Standard Replacement section lists 7 options from MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands — built to original-equipment specification. MAHLE / CLEVITE CB1461P is listed in this group.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2000 Honda CR-V, from APEX, ENGINETECH, AJUSA and 3 other brands. APEX ACS1018 carries the "Popular" badge.

This group includes APEX ACS1018, ENGINETECH HO20CSA and AJUSA 54069500 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts for the 2000 Honda CR-V come from 6 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, TOPLINE and 3 other brands. The "Popular" part is KING ENGINE BEARINGS MB5259AM.

The High Performance section: 3 options from MAHLE / CLEVITE and KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5259XPC is listed in this group.

Standard Replacement: 7 parts, from TOPLINE, KING ENGINE BEARINGS, MAHLE / CLEVITE and 3 other brands. A representative part number is KING ENGINE BEARINGS MB5259AM.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts for the 2000 Honda CR-V come from 6 brands — BCA, WJB / INMOTION PARTS, FEL-PRO and 3 other brands. The "Popular" part is BCA NS99315.

This group includes BCA NS99315, FEL-PRO 16275 and BCA NS99147 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

26 Crankshaft Seal parts for the 2000 Honda CR-V come from 15 brands — VICTOR REINZ, SCHAEFFLER, APEX and 12 other brands. The "Popular" part is APEX ABS100. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 2000 Honda CR-V, from APEX and SKP.

Part numbers include APEX AHB118 and SKP SKHB012.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts are listed for the 2000 Honda CR-V, from ITM ENGINE COMPONENTS, ENGINETECH, FEL-PRO and 5 other brands. ENGINETECH HHO20C carries the "Popular" badge.

Part numbers include ENGINETECH HHO20C, FEL-PRO 26159PT and AJUSA 10125100, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts are listed for the 2000 Honda CR-V, from VICTOR REINZ, APEX, ENGINETECH and 8 other brands. APEX AHS1036 carries the "Popular" badge.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Cylinder Head Plug parts for the 2000 Honda CR-V come from 2 brands — JAPANESE OE and MAHLE / CLEVITE.

This group includes JAPANESE OE KF811285 and MAHLE / CLEVITE B32774.

This table covers the Engine covers. Read more

One part is listed for the 2000 Honda CR-V — TECHPRO HO1228101.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2000 Honda CR-V, from ENGINETECH, AJUSA, APEX and 2 other brands. ENGINETECH HO20K1 carries the "Popular" badge.

This group includes ENGINETECH HO20K1, AJUSA 50180200 and APEX AFS1036 and the remaining parts above.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2000 Honda CR-V — ENGINETECH RCHO20P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts for the 2000 Honda CR-V come from 7 brands — MELLING, SKP, ENGINETECH and 4 other brands. The "Popular" part is MELLING V5196.

Listed part numbers: MELLING V5196, SKP SKV2547 and ENGINETECH EM2493, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2000 Honda CR-V, from SKP, ATP, DAYCO and 1 other brand.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594354.

The Standard Replacement section: 3 options from ATP, DAYCO and PIONEER. ATP 102328 is listed in this group.

This group includes SKP SK594354, ATP 102328 and DAYCO PB1577N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts are listed for the 2000 Honda CR-V, from BECK/ARNLEY, MAHLE / CLEVITE, APEX and 5 other brands. APEX AMS1360 carries the "Popular" badge.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Intake Valve parts for the 2000 Honda CR-V come from 8 brands — SBI, SKP, BECK/ARNLEY and 5 other brands. The "Popular" part is SBI 10742.

Part numbers include SBI 10742, SKP SKV4583 and BECK/ARNLEY 0213335, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

39 Motor Mount parts for the 2000 Honda CR-V come from 7 brands — WESTAR, DEA / MARMON RIDE CONTROL, ANCHOR and 4 other brands. The "Popular" part is DEA / MARMON RIDE CONTROL A6520. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 34 parts from WESTAR, DEA / MARMON RIDE CONTROL, ANCHOR and 3 other brands.

This table covers the Motor Mount inserts. Read more

One part is listed for the 2000 Honda CR-V — ENERGY SUSPENSION 161113G.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts for the 2000 Honda CR-V come from 2 brands — DEA / MARMON RIDE CONTROL and ANCHOR.

Listed part numbers: ANCHOR 301172, DEA / MARMON RIDE CONTROL MK5512 and DEA / MARMON RIDE CONTROL MK5511.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

79 Oil parts for the 2000 Honda CR-V come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is MOBIL 125195. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 39 parts from LIQUI MOLY, VALVOLINE, MOBIL and 1 other brand.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2000 Honda CR-V.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2000 Honda CR-V come from 2 brands — DORMAN and JAPANESE OE.

Listed part numbers: DORMAN 917436 and JAPANESE OE 15650P3FA00.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 2000 Honda CR-V come from 5 brands — DORMAN, ELRING, AGS and 2 other brands. The "Popular" part is AGS ODP00007.

This group includes AGS ODP00007, DORMAN 090053 and BECK/ARNLEY 0160088 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts are listed for the 2000 Honda CR-V, from DORMAN, FEL-PRO, AJUSA and 3 other brands. DORMAN 095144 carries the "Popular" badge.

Listed part numbers: DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2000 Honda CR-V come from 4 brands — BECK/ARNLEY, GATES, MOTORAD and 1 other brand.

This group includes BECK/ARNLEY 0160125, GATES 31109 and MOTORAD MO81 and the remaining parts above.